Binary Degrees to Diameter Parts Converter

Enter Binary Degrees


Diameter Parts





⇅ Switch toDiameter Parts to Binary Degrees Converter

How to use this Binary Degrees to Diameter Parts Converter 🤔

Follow these steps to convert given angle from the units of Binary Degrees to the units of Diameter Parts.

  1. Enter the input Binary Degrees value in the text field.
  2. The calculator converts the given Binary Degrees into Diameter Parts in realtime ⌚ using the conversion formula, and displays under the Diameter Parts label. You do not need to click any button. If the input changes, Diameter Parts value is re-calculated, just like that.
  3. You may copy the resulting Diameter Parts value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Binary Degrees to Diameter Parts?

The formula to convert given angle from Binary Degrees to Diameter Parts is:

Angle(Diameter Parts) = Angle(Binary Degrees) × 376.991 / 256

Substitute the given value of angle in binary degrees, i.e., Angle(Binary Degrees) in the above formula and simplify the right-hand side value. The resulting value is the angle in diameter parts, i.e., Angle(Diameter Parts).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a digital compass in a drone reads 90 binary degrees for navigation.
Convert this angle from binary degrees to Diameter Parts.

Answer:

Given:

The angle in binary degrees is:

Angle(Binary Degrees) = 90

Formula:

The formula to convert angle from binary degrees to diameter parts is:

Angle(Diameter Parts) = Angle(Binary Degrees) × 376.991 / 256

Substitution:

Substitute given weight Angle(Binary Degrees) = 90 in the above formula.

Angle(Diameter Parts) = 90 × 376.991 / 256

Angle(Diameter Parts) = 132.5359

Final Answer:

Therefore, 90 ° is equal to 132.5359 diameter part.

The angle is 132.5359 diameter part, in diameter parts.

2

Consider that the rotation needed for a robotic arm is 180 binary degrees.
Convert this angle from binary degrees to Diameter Parts.

Answer:

Given:

The angle in binary degrees is:

Angle(Binary Degrees) = 180

Formula:

The formula to convert angle from binary degrees to diameter parts is:

Angle(Diameter Parts) = Angle(Binary Degrees) × 376.991 / 256

Substitution:

Substitute given weight Angle(Binary Degrees) = 180 in the above formula.

Angle(Diameter Parts) = 180 × 376.991 / 256

Angle(Diameter Parts) = 265.0718

Final Answer:

Therefore, 180 ° is equal to 265.0718 diameter part.

The angle is 265.0718 diameter part, in diameter parts.

Binary Degrees to Diameter Parts Conversion Table

The following table gives some of the most used conversions from Binary Degrees to Diameter Parts.

Binary Degrees (°)Diameter Parts (diameter part)
0 °0 diameter part
1 °1.4726 diameter part
10 °14.7262 diameter part
45 °66.2679 diameter part
90 °132.5359 diameter part
180 °265.0718 diameter part
360 °530.1436 diameter part
1000 °1472.6211 diameter part

Binary Degrees

Binary degrees, or 'binary angles,' are a unit of angular measurement used in digital systems where angles are represented using binary numbers. This system is particularly useful in computer graphics, robotics, and digital signal processing, where binary calculations are more efficient than traditional degrees.

Diameter Parts

Diameter parts are a less common unit of angular measurement, historically used to describe angles in terms of the fractional parts of a circle's diameter. This unit was more prevalent in classical geometry and certain types of mechanical design, where direct relationships between linear measurements and angles were essential.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Binary Degrees to Diameter Parts in Angle?

2. Is this tool free or paid?

3. How do I convert Angle from Binary Degrees to Diameter Parts?