Point to Twip Converter

Enter Point


Twip





β‡… Switch toTwip to Point Converter

How to use this Point to Twip Converter πŸ€”

Follow these steps to convert given length from the units of Point to the units of Twip.

Point to Twip Converter | point to twip
  1. Enter the input Point value in the text field.
  2. The calculator converts the given Point into Twip in realtime ⌚ using the conversion formula, and displays under the Twip label. You do not need to click any button. If the input changes, Twip value is re-calculated, just like that.
  3. You may copy the resulting Twip value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Point to Twip?

The formula to convert given length from Point to Twip is:

Length(Twip) = Length(Point) × 20

Substitute the given value of length in point, i.e., Length(Point) in the above formula and simplify the right-hand side value. The resulting value is the length in twip, i.e., Length(Twip).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a font size is set to 12 points in a document.
Convert this size from points to Twip.

Answer:

Given:

The length in point is:

Length(Point) = 12

Formula:

The formula to convert length from point to twip is:

Length(Twip) = Length(Point) × 20

Substitution:

Substitute given weight Length(Point) = 12 in the above formula.

Length(Twip) = 12 × 20

Length(Twip) = 240

Final Answer:

Therefore, 12 point is equal to 240 twip.

The length is 240 twip, in twip.

2

Consider that a headline is designed with a font size of 24 points.
Convert this size from points to Twip.

Answer:

Given:

The length in point is:

Length(Point) = 24

Formula:

The formula to convert length from point to twip is:

Length(Twip) = Length(Point) × 20

Substitution:

Substitute given weight Length(Point) = 24 in the above formula.

Length(Twip) = 24 × 20

Length(Twip) = 480

Final Answer:

Therefore, 24 point is equal to 480 twip.

The length is 480 twip, in twip.

Point to Twip Conversion Table

The following table gives some of the most used conversions from Point to Twip.

Point (point)Twip (twip)
0 point0 twip
1 point20 twip
2 point40 twip
3 point60 twip
4 point80 twip
5 point100 twip
6 point120 twip
7 point140 twip
8 point160 twip
9 point180 twip
10 point200 twip
20 point400 twip
50 point1000 twip
100 point2000 twip
1000 point20000 twip
10000 point200000 twip
100000 point2000000 twip

Point

A point is a unit of length used primarily in typography and printing. One point is equivalent to 1/72 of an inch or approximately 0.3528 millimeters.

The point is defined as a standard unit of measurement for font sizes, line spacing, and other typographic elements in printed materials.

Points are widely used in the printing and graphic design industries to specify the size of type, spacing, and other design elements. The unit ensures precision and consistency in the presentation of text and graphics.

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Point to Twip in Length?

2. Is this tool free or paid?

3. How do I convert Length from Point to Twip?