Turns to Diameter Parts Converter

Enter Turns


Diameter Parts





⇅ Switch toDiameter Parts to Turns Converter

How to use this Turns to Diameter Parts Converter 🤔

Follow these steps to convert given angle from the units of Turns to the units of Diameter Parts.

  1. Enter the input Turns value in the text field.
  2. The calculator converts the given Turns into Diameter Parts in realtime ⌚ using the conversion formula, and displays under the Diameter Parts label. You do not need to click any button. If the input changes, Diameter Parts value is re-calculated, just like that.
  3. You may copy the resulting Diameter Parts value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Turns to Diameter Parts?

The formula to convert given angle from Turns to Diameter Parts is:

Angle(Diameter Parts) = Angle(Turns) × 376.991

Substitute the given value of angle in turns, i.e., Angle(Turns) in the above formula and simplify the right-hand side value. The resulting value is the angle in diameter parts, i.e., Angle(Diameter Parts).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a turntable rotates by 0.25 turns to play a vinyl record.
Convert this rotation from turns to Diameter Parts.

Answer:

Given:

The angle in turns is:

Angle(Turns) = 0.25

Formula:

The formula to convert angle from turns to diameter parts is:

Angle(Diameter Parts) = Angle(Turns) × 376.991

Substitution:

Substitute given weight Angle(Turns) = 0.25 in the above formula.

Angle(Diameter Parts) = 0.25 × 376.991

Angle(Diameter Parts) = 94.2477

Final Answer:

Therefore, 0.25 turn is equal to 94.2477 diameter part.

The angle is 94.2477 diameter part, in diameter parts.

2

Consider that a wind turbine completes 2 turns in a light breeze.
Convert this rotation from turns to Diameter Parts.

Answer:

Given:

The angle in turns is:

Angle(Turns) = 2

Formula:

The formula to convert angle from turns to diameter parts is:

Angle(Diameter Parts) = Angle(Turns) × 376.991

Substitution:

Substitute given weight Angle(Turns) = 2 in the above formula.

Angle(Diameter Parts) = 2 × 376.991

Angle(Diameter Parts) = 753.982

Final Answer:

Therefore, 2 turn is equal to 753.982 diameter part.

The angle is 753.982 diameter part, in diameter parts.

Turns to Diameter Parts Conversion Table

The following table gives some of the most used conversions from Turns to Diameter Parts.

Turns (turn)Diameter Parts (diameter part)
0 turn0 diameter part
1 turn376.991 diameter part
10 turn3769.91 diameter part
45 turn16964.595 diameter part
90 turn33929.19 diameter part
180 turn67858.38 diameter part
360 turn135716.76 diameter part
1000 turn376991 diameter part

Turns

A turn, also known as a revolution or full circle, represents a complete rotation around a central point and is equal to 360 degrees or 2π radians. Turns are used in various disciplines, including engineering, navigation, and geometry, to describe full rotations. The concept of turns is deeply rooted in both mathematical theory and practical applications, such as in the design of gears and wheels.

Diameter Parts

Diameter parts are a less common unit of angular measurement, historically used to describe angles in terms of the fractional parts of a circle's diameter. This unit was more prevalent in classical geometry and certain types of mechanical design, where direct relationships between linear measurements and angles were essential.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Turns to Diameter Parts in Angle?

2. Is this tool free or paid?

3. How do I convert Angle from Turns to Diameter Parts?