ft to ken | Feet to Kens Converter

How to use this Feet to Kens Converter 🤔

Follow these steps to convert given Feet value from Feet units to Kens units.

Enter the input Feet value in the text field.
The given Feet is converted to Kens in realtime ⌚ using the formula, and displayed under the Kens label.
You may copy the resulting Kens value using the Copy button.

Formula

To convert given length from Feet to Kens, use the following formula.

Kens = Feet / 6.950000000656693

Calculation

Calculation will be done after you enter a valid input.

Feet to Kens Conversion Table

The following table gives some of the most used conversions from Feet to Kens.

Feet (ft)	Kens (ken)
0 ft	0 ken
1 ft	0.1439 ken
2 ft	0.2878 ken
3 ft	0.4317 ken
4 ft	0.5755 ken
5 ft	0.7194 ken
6 ft	0.8633 ken
7 ft	1.0072 ken
8 ft	1.1511 ken
9 ft	1.295 ken
10 ft	1.4388 ken
20 ft	2.8777 ken
50 ft	7.1942 ken
100 ft	14.3885 ken
1000 ft	143.8849 ken
10000 ft	1438.8489 ken
100000 ft	14388.4892 ken

Feet

A foot (symbol: ft) is a unit of length used in the United States, the United Kingdom, and Canada. One foot is equal to 0.3048 meters.

The foot originated from various units used in ancient civilizations. Its current definition is based on the international agreement of 1959, which standardized it to exactly 0.3048 meters.

Feet are commonly used to measure height, length, and short distances. Despite the global shift to the metric system, the foot remains in use in these countries.

Kens

A ken is a historical unit of length used in various cultures, particularly in Asia. The length of a ken can vary depending on the region and context. In Japan, one ken is approximately equivalent to 6 feet or about 1.8288 meters.

The ken was traditionally used in architectural and construction measurements, particularly in the design of buildings and layout of spaces.

Ken measurements were utilized in historical architecture and construction practices in Asian cultures. Although not commonly used today, the unit provides historical context for traditional measurement standards and practices in building and design.

{ "conversion": "feet-kens", "x_slug": "feet", "y_slug": "kens", "x": "ft", "y": "ken", "x_desc": "Feet", "y_desc": "Kens", "category": "Length", "symbol": "m", "formula": "x / 6.950000000656693", "precision": 16, "examples": "<div class=\"example\">\n <div class=\"example_head\">1\n <h3 class=\"question\">Consider that a luxury yacht has a beam width of 60 feet. Convert this width from feet to Kens.</h3></div>\n <h4 class=\"answer\">Answer:</h4>\n Given:\n The length in feet is:\n Length(Feet) = 60\n Formula:\n The formula to convert length from feet to kens is:\n Length(Kens) = Length(Feet) / 6.950000000656693\n Substitution:\n Substitute given weight Length(Feet) = 60 in the above formula.\n Length(Kens) = 60 / 6.950000000656693\n Length(Kens) = 8.6331\n Final Answer:\n Therefore, 60 ft is equal to 8.6331 ken.\n The length is 8.6331 ken, in kens.\n </div>\n <div class=\"example\">\n <div class=\"example_head\">2\n <h3 class=\"question\">Consider that a skyscraper's floor-to-ceiling height is 15 feet. Convert this height from feet to Kens.</h3></div>\n <h4 class=\"answer\">Answer:</h4>\n Given:\n The length in feet is:\n Length(Feet) = 15\n Formula:\n The formula to convert length from feet to kens is:\n Length(Kens) = Length(Feet) / 6.950000000656693\n Substitution:\n Substitute given weight Length(Feet) = 15 in the above formula.\n Length(Kens) = 15 / 6.950000000656693\n Length(Kens) = 2.1583\n Final Answer:\n Therefore, 15 ft is equal to 2.1583 ken.\n The length is 2.1583 ken, in kens.\n </div>\n ", "img": "<img class=\"conversion\" src=\"/images/unit/length/feet-kens.webp\" height=\"360\" width=\"640\" alt=\"Feet to Kens Converter | ft to ken\" />", "table1n": "<h2>Feet to Kens Conversion Table</h2>The following table gives some of the most used conversions from Feet to Kens.<table><thead><tr><th scope=\"column\" role=\"columnheader\">Feet (ft)</th><th scope=\"column\" role=\"columnheader\">Kens (ken)</th><tr></thead><tbody><tr><td>0 ft</td><td>0 ken</td></tr><tr><td>1 ft</td><td>0.1439 ken</td></tr><tr><td>2 ft</td><td>0.2878 ken</td></tr><tr><td>3 ft</td><td>0.4317 ken</td></tr><tr><td>4 ft</td><td>0.5755 ken</td></tr><tr><td>5 ft</td><td>0.7194 ken</td></tr><tr><td>6 ft</td><td>0.8633 ken</td></tr><tr><td>7 ft</td><td>1.0072 ken</td></tr><tr><td>8 ft</td><td>1.1511 ken</td></tr><tr><td>9 ft</td><td>1.295 ken</td></tr><tr><td>10 ft</td><td>1.4388 ken</td></tr><tr><td>20 ft</td><td>2.8777 ken</td></tr><tr><td>50 ft</td><td>7.1942 ken</td></tr><tr><td>100 ft</td><td>14.3885 ken</td></tr><tr><td>1000 ft</td><td>143.8849 ken</td></tr><tr><td>10000 ft</td><td>1438.8489 ken</td></tr><tr><td>100000 ft</td><td>14388.4892 ken</td></tr></table>", "units": [ [ "meters", "Meters", "m" ], [ "kilometers", "Kilometers", "km" ], [ "decimeters", "Decimeters", "dm" ], [ "centimeters", "Centimeters", "cm" ], [ "millimeters", "Millimeters", "mm" ], [ "micrometers", "Micrometers", "µm" ], [ "nanometers", "Nanometers", "nm" ], [ "miles", "Miles", "mi" ], [ "yards", "Yards", "yd" ], [ "feet", "Feet", "ft" ], [ "inches", "Inches", "in" ], [ "lightyears", "Lightyears", "ly" ], [ "exameters", "Exameters", "Em" ], [ "petameters", "Petameters", "Pm" ], [ "terameters", "Terameters", "Tm" ], [ "gigameters", "Gigameters", "Gm" ], [ "megameters", "Megameters", "Mm" ], [ "hectometers", "Hectameters", "hm" ], [ "dekameters", "Dekameters", "dam" ], [ "microns", "Microns", "µ" ], [ "picometers", "Picometers", "pm" ], [ "femtometers", "Femtometers", "fm" ], [ "attometers", "Attometers", "am" ], [ "megaparsecs", "Megaparsecs", "Mpc" ], [ "kiloparsecs", "Kiloparsecs", "kpc" ], [ "parsecs", "Parsecs", "pc" ], [ "astronomical_unit", "Astronomical Units", "AU" ], [ "leagues", "Leagues", "lea" ], [ "nautical_leagues_uk", "Nautical Leagues (UK)", "nautical league" ], [ "nautical_leagues", "Nautical Leagues (International)", "nautical league" ], [ "leagues_statute", "Leagues (statute)", "st.league" ], [ "nautical_miles_uk", "Nautical Miles (UK)", "NM (UK)" ], [ "nautical_miles", "Nautical miles (International)", "nmi" ], [ "miles_statute", "Miles (statute)", "mi (US)" ], [ "miles_us_survey", "Miles (US survey)", "mi" ], [ "miles_roman", "Miles (Roman)", "mi (roman)" ], [ "kiloyards", "Kiloyards", "kyd" ], [ "furlongs", "Furlongs", "fur" ], [ "furlongs_us_survey", "Furlongs (US survey)", "fur" ], [ "chains", "Chains", "ch" ], [ "chain_us_survey", "Chains (US survey)", "ch" ], [ "ropes", "Ropes", "rope" ], [ "rods", "Rod", "rd" ], [ "rods_us_survey", "Rods (US survey)", "rd" ], [ "perch", "Perch", "perch" ], [ "poles", "Poles", "pole" ], [ "fathoms", "Fathoms", "fath" ], [ "fathoms_us_survey", "Fathoms (US survey)", "fath" ], [ "ell", "ell", "ell" ], [ "foot_us_survey", "Feet (US survey)", "ft" ], [ "links", "Links", "li" ], [ "links_us_survey", "link (US survey)", "li" ], [ "cubits_uk", "Cubits (UK)", "cubit" ], [ "hands", "Hands", "hand" ], [ "span_cloth", "Span (cloth)", "span" ], [ "fingers_cloth", "Fingers (cloth)", "finger" ], [ "nails", "Nails (cloth)", "nail" ], [ "inches_us_survey", "Inches (US survey)", "in" ], [ "barleycorns", "Barleycorns", "barleycorn" ], [ "mil", "mil", "mil" ], [ "microinches", "Microinches", "µin" ], [ "angstroms", "Angstroms", "A" ], [ "fermi", "Fermi", "f" ], [ "arpents", "Arpent", "arpent" ], [ "picas", "Pica", "pica" ], [ "points", "Point", "point" ], [ "twips", "Twip", "twip" ], [ "aln", "aln", "aln" ], [ "famns", "Famns", "famn" ], [ "calibers", "Caliber", "cl" ], [ "centiinches", "Centiinch", "cin" ], [ "kens", "Kens", "ken" ], [ "russian_archin", "Russian archin", "russian archin" ], [ "roman_actus", "Roman actus", "Roman actus" ], [ "vara_de_tarea", "Vara De Tarea", "vara de tarea" ], [ "vara_conuquera", "Vara Conuquera", "vara conuquera" ], [ "vara_castellana", "vara Castellana", "vara castellana" ], [ "cubits_greek", "Cubit (Greek)", "cubit (Greek)" ], [ "long_reeds", "Long Reed", "long reed" ], [ "reeds", "Reed", "reed" ], [ "long_cubits", "Long cubits", "long cubit" ], [ "handbreadths", "Handbreadth", "handbreadth" ], [ "fingerbreadth", "Fingerbreadth", "fingerbreadth" ], [ "planck_length", "Planck length", "Planck length" ], [ "electron_radius_classical", "Electron radius (classical) ", "electron radius" ], [ "bohr_radius", "Bohr radius", "b" ], [ "earths_equatorial_radius", "Earth's equatorial radius", "earth's equatorial radius" ], [ "earths_polar_radius", "Earth's polar radius", "Earth's polar radius" ], [ "earths_distance_from_sun", "Earth's distance from sun", "earth's distance from sun" ], [ "suns_radius", "Sun's radius", "sun's radius" ] ], "x_long_desc": "A foot (symbol: ft) is a unit of length used in the United States, the United Kingdom, and Canada. One foot is equal to 0.3048 meters.The foot originated from various units used in ancient civilizations. Its current definition is based on the international agreement of 1959, which standardized it to exactly 0.3048 meters.Feet are commonly used to measure height, length, and short distances. Despite the global shift to the metric system, the foot remains in use in these countries.", "y_long_desc": "A ken is a historical unit of length used in various cultures, particularly in Asia. The length of a ken can vary depending on the region and context. In Japan, one ken is approximately equivalent to 6 feet or about 1.8288 meters. The ken was traditionally used in architectural and construction measurements, particularly in the design of buildings and layout of spaces.Ken measurements were utilized in historical architecture and construction practices in Asian cultures. Although not commonly used today, the unit provides historical context for traditional measurement standards and practices in building and design." }

Convert Feet to Kens