Arpent to link (US survey) Converter

Enter Arpent


link (US survey)





β‡… Switch tolink (US survey) to Arpent Converter

How to use this Arpent to link (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Arpent to the units of link (US survey).

  1. Enter the input Arpent value in the text field.
  2. The calculator converts the given Arpent into link (US survey) in realtime ⌚ using the conversion formula, and displays under the link (US survey) label. You do not need to click any button. If the input changes, link (US survey) value is re-calculated, just like that.
  3. You may copy the resulting link (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Arpent to link (US survey)?

The formula to convert given length from Arpent to link (US survey) is:

Length(link (US survey)) = Length(Arpent) / 0.0034375068776962155

Substitute the given value of length in arpent, i.e., Length(Arpent) in the above formula and simplify the right-hand side value. The resulting value is the length in link (us survey), i.e., Length(link (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a plot of land is measured to be 3 arpents in length.
Convert this length from arpents to link (US survey).

Answer:

Given:

The length in arpent is:

Length(Arpent) = 3

Formula:

The formula to convert length from arpent to link (us survey) is:

Length(link (US survey)) = Length(Arpent) / 0.0034375068776962155

Substitution:

Substitute given weight Length(Arpent) = 3 in the above formula.

Length(link (US survey)) = 3 / 0.0034375068776962155

Length(link (US survey)) = 872.7255

Final Answer:

Therefore, 3 arpent is equal to 872.7255 li.

The length is 872.7255 li, in link (us survey).

2

Consider that a historical land survey recorded an area of 10 arpents.
Convert this area from arpents to link (US survey).

Answer:

Given:

The length in arpent is:

Length(Arpent) = 10

Formula:

The formula to convert length from arpent to link (us survey) is:

Length(link (US survey)) = Length(Arpent) / 0.0034375068776962155

Substitution:

Substitute given weight Length(Arpent) = 10 in the above formula.

Length(link (US survey)) = 10 / 0.0034375068776962155

Length(link (US survey)) = 2909.0851

Final Answer:

Therefore, 10 arpent is equal to 2909.0851 li.

The length is 2909.0851 li, in link (us survey).

Arpent to link (US survey) Conversion Table

The following table gives some of the most used conversions from Arpent to link (US survey).

Arpent (arpent)link (US survey) (li)
0 arpent0 li
1 arpent290.9085 li
2 arpent581.817 li
3 arpent872.7255 li
4 arpent1163.634 li
5 arpent1454.5425 li
6 arpent1745.4511 li
7 arpent2036.3596 li
8 arpent2327.2681 li
9 arpent2618.1766 li
10 arpent2909.0851 li
20 arpent5818.1702 li
50 arpent14545.4254 li
100 arpent29090.8509 li
1000 arpent290908.5089 li
10000 arpent2909085.0886 li
100000 arpent29090850.8864 li

Arpent

An arpent is a historical unit of length used primarily in French-speaking regions and in land measurement. One arpent is approximately equivalent to 192.75 feet or 58.66 meters.

The arpent was used in various regions, including France and the former French colonies, to measure land and property. Its length could vary slightly depending on the specific region and historical context.

Arpents were used in land surveying and agriculture, particularly in historical and regional contexts. Although less common today, the unit provides historical insight into land measurement practices and regional variations in measurement standards.

link (US survey)

A link (US survey) is a unit of length used primarily in land surveying in the United States. One US survey link is equivalent to exactly 0.66 feet or approximately 0.201168 meters.

The US survey link is defined as one-hundredth of a US survey chain, where one US survey chain is 66 feet long. This unit provides precision for finer measurements in land surveying and mapping.

Links (US survey) are used in land surveying to measure shorter distances and ensure accuracy in property measurement and mapping activities in the United States.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Arpent to link (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Arpent to link (US survey)?