Arpent to Rods (US survey) Converter

Enter Arpent


Rods (US survey)





β‡… Switch toRods (US survey) to Arpent Converter

How to use this Arpent to Rods (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Arpent to the units of Rods (US survey).

  1. Enter the input Arpent value in the text field.
  2. The calculator converts the given Arpent into Rods (US survey) in realtime ⌚ using the conversion formula, and displays under the Rods (US survey) label. You do not need to click any button. If the input changes, Rods (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Rods (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Arpent to Rods (US survey)?

The formula to convert given length from Arpent to Rods (US survey) is:

Length(Rods (US survey)) = Length(Arpent) / 0.08593767195969333

Substitute the given value of length in arpent, i.e., Length(Arpent) in the above formula and simplify the right-hand side value. The resulting value is the length in rods (us survey), i.e., Length(Rods (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a plot of land is measured to be 3 arpents in length.
Convert this length from arpents to Rods (US survey).

Answer:

Given:

The length in arpent is:

Length(Arpent) = 3

Formula:

The formula to convert length from arpent to rods (us survey) is:

Length(Rods (US survey)) = Length(Arpent) / 0.08593767195969333

Substitution:

Substitute given weight Length(Arpent) = 3 in the above formula.

Length(Rods (US survey)) = 3 / 0.08593767195969333

Length(Rods (US survey)) = 34.909

Final Answer:

Therefore, 3 arpent is equal to 34.909 rd.

The length is 34.909 rd, in rods (us survey).

2

Consider that a historical land survey recorded an area of 10 arpents.
Convert this area from arpents to Rods (US survey).

Answer:

Given:

The length in arpent is:

Length(Arpent) = 10

Formula:

The formula to convert length from arpent to rods (us survey) is:

Length(Rods (US survey)) = Length(Arpent) / 0.08593767195969333

Substitution:

Substitute given weight Length(Arpent) = 10 in the above formula.

Length(Rods (US survey)) = 10 / 0.08593767195969333

Length(Rods (US survey)) = 116.3634

Final Answer:

Therefore, 10 arpent is equal to 116.3634 rd.

The length is 116.3634 rd, in rods (us survey).

Arpent to Rods (US survey) Conversion Table

The following table gives some of the most used conversions from Arpent to Rods (US survey).

Arpent (arpent)Rods (US survey) (rd)
0 arpent0 rd
1 arpent11.6363 rd
2 arpent23.2727 rd
3 arpent34.909 rd
4 arpent46.5454 rd
5 arpent58.1817 rd
6 arpent69.818 rd
7 arpent81.4544 rd
8 arpent93.0907 rd
9 arpent104.7271 rd
10 arpent116.3634 rd
20 arpent232.7268 rd
50 arpent581.817 rd
100 arpent1163.634 rd
1000 arpent11636.3404 rd
10000 arpent116363.4035 rd
100000 arpent1163634.0352 rd

Arpent

An arpent is a historical unit of length used primarily in French-speaking regions and in land measurement. One arpent is approximately equivalent to 192.75 feet or 58.66 meters.

The arpent was used in various regions, including France and the former French colonies, to measure land and property. Its length could vary slightly depending on the specific region and historical context.

Arpents were used in land surveying and agriculture, particularly in historical and regional contexts. Although less common today, the unit provides historical insight into land measurement practices and regional variations in measurement standards.

Rods (US survey)

A rod (US survey) is a unit of length used primarily in land surveying in the United States. One US survey rod is equivalent to exactly 16.5 feet or approximately 5.0292 meters.

The US survey rod is defined as 16.5 feet, based on historical surveying practices and used for measuring and plotting land.

Rods (US survey) are used in land surveying, property measurement, and agricultural practices in the United States. The unit ensures consistency and accuracy in measuring shorter distances within these fields.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Arpent to Rods (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Arpent to Rods (US survey)?