Chains to Twip Converter

Enter Chains


Twip





β‡… Switch toTwip to Chains Converter

How to use this Chains to Twip Converter πŸ€”

Follow these steps to convert given length from the units of Chains to the units of Twip.

Chains to Twip Converter | ch to twip
  1. Enter the input Chains value in the text field.
  2. The calculator converts the given Chains into Twip in realtime ⌚ using the conversion formula, and displays under the Twip label. You do not need to click any button. If the input changes, Twip value is re-calculated, just like that.
  3. You may copy the resulting Twip value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Chains to Twip?

The formula to convert given length from Chains to Twip is:

Length(Twip) = Length(Chains) / 8.768237938584318e-7

Substitute the given value of length in chains, i.e., Length(Chains) in the above formula and simplify the right-hand side value. The resulting value is the length in twip, i.e., Length(Twip).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a farmer's field is 20 chains long.
Convert this distance from chains to Twip.

Answer:

Given:

The length in chains is:

Length(Chains) = 20

Formula:

The formula to convert length from chains to twip is:

Length(Twip) = Length(Chains) / 8.768237938584318e-7

Substitution:

Substitute given weight Length(Chains) = 20 in the above formula.

Length(Twip) = 20 / 8.768237938584318e-7

Length(Twip) = 22809599.9904

Final Answer:

Therefore, 20 ch is equal to 22809599.9904 twip.

The length is 22809599.9904 twip, in twip.

2

Consider that a surveyor measures a plot of land that is 15 chains in length.
Convert this distance from chains to Twip.

Answer:

Given:

The length in chains is:

Length(Chains) = 15

Formula:

The formula to convert length from chains to twip is:

Length(Twip) = Length(Chains) / 8.768237938584318e-7

Substitution:

Substitute given weight Length(Chains) = 15 in the above formula.

Length(Twip) = 15 / 8.768237938584318e-7

Length(Twip) = 17107199.9928

Final Answer:

Therefore, 15 ch is equal to 17107199.9928 twip.

The length is 17107199.9928 twip, in twip.

Chains to Twip Conversion Table

The following table gives some of the most used conversions from Chains to Twip.

Chains (ch)Twip (twip)
0 ch0 twip
1 ch1140479.9995 twip
2 ch2280959.999 twip
3 ch3421439.9986 twip
4 ch4561919.9981 twip
5 ch5702399.9976 twip
6 ch6842879.9971 twip
7 ch7983359.9966 twip
8 ch9123839.9962 twip
9 ch10264319.9957 twip
10 ch11404799.9952 twip
20 ch22809599.9904 twip
50 ch57023999.9761 twip
100 ch114047999.9521 twip
1000 ch1140479999.5214 twip
10000 ch11404799995.2138 twip
100000 ch114047999952.1381 twip

Chains

A chain is a unit of length used primarily in land surveying and agriculture. One chain is equivalent to 66 feet or approximately 20.1168 meters.

The chain is defined as 66 feet, which is historically based on the length of a chain used in surveying practices and land measurement.

Chains are commonly used in land surveying for measuring distances, particularly in the United States and the United Kingdom. The unit is useful for tasks such as plotting and dividing land and has historical significance in the development of surveying techniques.

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Chains to Twip in Length?

2. Is this tool free or paid?

3. How do I convert Length from Chains to Twip?