Cubits (UK) to Fathoms (US survey) Converter

Enter Cubits (UK)


Fathoms (US survey)





β‡… Switch toFathoms (US survey) to Cubits (UK) Converter

How to use this Cubits (UK) to Fathoms (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Cubits (UK) to the units of Fathoms (US survey).

Cubits (UK) to Fathoms (US survey) Converter | cubit to fath
  1. Enter the input Cubits (UK) value in the text field.
  2. The calculator converts the given Cubits (UK) into Fathoms (US survey) in realtime ⌚ using the conversion formula, and displays under the Fathoms (US survey) label. You do not need to click any button. If the input changes, Fathoms (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Fathoms (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Cubits (UK) to Fathoms (US survey)?

The formula to convert given length from Cubits (UK) to Fathoms (US survey) is:

Length(Fathoms (US survey)) = Length(Cubits (UK)) / 4.000007999735839

Substitute the given value of length in cubits (uk), i.e., Length(Cubits (UK)) in the above formula and simplify the right-hand side value. The resulting value is the length in fathoms (us survey), i.e., Length(Fathoms (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that an ancient artifact is measured to be 2 cubits (UK) in length.
Convert this length from cubits (UK) to Fathoms (US survey).

Answer:

Given:

The length in cubits (uk) is:

Length(Cubits (UK)) = 2

Formula:

The formula to convert length from cubits (uk) to fathoms (us survey) is:

Length(Fathoms (US survey)) = Length(Cubits (UK)) / 4.000007999735839

Substitution:

Substitute given weight Length(Cubits (UK)) = 2 in the above formula.

Length(Fathoms (US survey)) = 2 / 4.000007999735839

Length(Fathoms (US survey)) = 0.5

Final Answer:

Therefore, 2 cubit is equal to 0.5 fath.

The length is 0.5 fath, in fathoms (us survey).

2

Consider that a historical building's entrance is 4 cubits (UK) tall.
Convert this height from cubits (UK) to Fathoms (US survey).

Answer:

Given:

The length in cubits (uk) is:

Length(Cubits (UK)) = 4

Formula:

The formula to convert length from cubits (uk) to fathoms (us survey) is:

Length(Fathoms (US survey)) = Length(Cubits (UK)) / 4.000007999735839

Substitution:

Substitute given weight Length(Cubits (UK)) = 4 in the above formula.

Length(Fathoms (US survey)) = 4 / 4.000007999735839

Length(Fathoms (US survey)) = 1

Final Answer:

Therefore, 4 cubit is equal to 1 fath.

The length is 1 fath, in fathoms (us survey).

Cubits (UK) to Fathoms (US survey) Conversion Table

The following table gives some of the most used conversions from Cubits (UK) to Fathoms (US survey).

Cubits (UK) (cubit)Fathoms (US survey) (fath)
0 cubit0 fath
1 cubit0.25 fath
2 cubit0.5 fath
3 cubit0.75 fath
4 cubit1 fath
5 cubit1.25 fath
6 cubit1.5 fath
7 cubit1.75 fath
8 cubit2 fath
9 cubit2.25 fath
10 cubit2.5 fath
20 cubit5 fath
50 cubit12.5 fath
100 cubit25 fath
1000 cubit249.9995 fath
10000 cubit2499.995 fath
100000 cubit24999.95 fath

Cubits (UK)

A cubit (UK) is an ancient unit of length historically used in various cultures, including the United Kingdom. One cubit (UK) is approximately equivalent to 18 inches or 0.4572 meters.

The UK cubit is based on the length from the elbow to the tip of the middle finger, and its exact length can vary slightly depending on historical standards and regional practices.

Cubits (UK) were used for measuring lengths in construction and textiles and have historical significance in architecture and historical measurements. Although not commonly used today, the cubit remains a point of interest in historical studies and ancient practices.

Fathoms (US survey)

A fathom (US survey) is a unit of length used primarily in maritime contexts in the United States to measure water depth. One US survey fathom is equivalent to exactly 6 feet or approximately 1.8288 meters.

The US survey fathom is defined as 6 feet, consistent with historical maritime measurement practices and used for depth soundings and underwater measurements.

Fathoms (US survey) are utilized in navigation, fishing, and marine activities in the United States to describe water depth. The unit provides a practical measurement for underwater distances and ensures consistency in maritime practices.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Cubits (UK) to Fathoms (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Cubits (UK) to Fathoms (US survey)?