Cubits (UK) to link (US survey) Converter

Enter Cubits (UK)


link (US survey)





β‡… Switch tolink (US survey) to Cubits (UK) Converter

How to use this Cubits (UK) to link (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Cubits (UK) to the units of link (US survey).

Cubits (UK) to link (US survey) Converter | cubit to li
  1. Enter the input Cubits (UK) value in the text field.
  2. The calculator converts the given Cubits (UK) into link (US survey) in realtime ⌚ using the conversion formula, and displays under the link (US survey) label. You do not need to click any button. If the input changes, link (US survey) value is re-calculated, just like that.
  3. You may copy the resulting link (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Cubits (UK) to link (US survey)?

The formula to convert given length from Cubits (UK) to link (US survey) is:

Length(link (US survey)) = Length(Cubits (UK)) / 0.44000088000312926

Substitute the given value of length in cubits (uk), i.e., Length(Cubits (UK)) in the above formula and simplify the right-hand side value. The resulting value is the length in link (us survey), i.e., Length(link (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that an ancient artifact is measured to be 2 cubits (UK) in length.
Convert this length from cubits (UK) to link (US survey).

Answer:

Given:

The length in cubits (uk) is:

Length(Cubits (UK)) = 2

Formula:

The formula to convert length from cubits (uk) to link (us survey) is:

Length(link (US survey)) = Length(Cubits (UK)) / 0.44000088000312926

Substitution:

Substitute given weight Length(Cubits (UK)) = 2 in the above formula.

Length(link (US survey)) = 2 / 0.44000088000312926

Length(link (US survey)) = 4.5454

Final Answer:

Therefore, 2 cubit is equal to 4.5454 li.

The length is 4.5454 li, in link (us survey).

2

Consider that a historical building's entrance is 4 cubits (UK) tall.
Convert this height from cubits (UK) to link (US survey).

Answer:

Given:

The length in cubits (uk) is:

Length(Cubits (UK)) = 4

Formula:

The formula to convert length from cubits (uk) to link (us survey) is:

Length(link (US survey)) = Length(Cubits (UK)) / 0.44000088000312926

Substitution:

Substitute given weight Length(Cubits (UK)) = 4 in the above formula.

Length(link (US survey)) = 4 / 0.44000088000312926

Length(link (US survey)) = 9.0909

Final Answer:

Therefore, 4 cubit is equal to 9.0909 li.

The length is 9.0909 li, in link (us survey).

Cubits (UK) to link (US survey) Conversion Table

The following table gives some of the most used conversions from Cubits (UK) to link (US survey).

Cubits (UK) (cubit)link (US survey) (li)
0 cubit0 li
1 cubit2.2727 li
2 cubit4.5454 li
3 cubit6.8182 li
4 cubit9.0909 li
5 cubit11.3636 li
6 cubit13.6363 li
7 cubit15.9091 li
8 cubit18.1818 li
9 cubit20.4545 li
10 cubit22.7272 li
20 cubit45.4545 li
50 cubit113.6361 li
100 cubit227.2723 li
1000 cubit2272.7227 li
10000 cubit22727.2273 li
100000 cubit227272.2727 li

Cubits (UK)

A cubit (UK) is an ancient unit of length historically used in various cultures, including the United Kingdom. One cubit (UK) is approximately equivalent to 18 inches or 0.4572 meters.

The UK cubit is based on the length from the elbow to the tip of the middle finger, and its exact length can vary slightly depending on historical standards and regional practices.

Cubits (UK) were used for measuring lengths in construction and textiles and have historical significance in architecture and historical measurements. Although not commonly used today, the cubit remains a point of interest in historical studies and ancient practices.

link (US survey)

A link (US survey) is a unit of length used primarily in land surveying in the United States. One US survey link is equivalent to exactly 0.66 feet or approximately 0.201168 meters.

The US survey link is defined as one-hundredth of a US survey chain, where one US survey chain is 66 feet long. This unit provides precision for finer measurements in land surveying and mapping.

Links (US survey) are used in land surveying to measure shorter distances and ensure accuracy in property measurement and mapping activities in the United States.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Cubits (UK) to link (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Cubits (UK) to link (US survey)?