Fathoms (US survey) to Pica Converter

Enter Fathoms (US survey)


Pica





β‡… Switch toPica to Fathoms (US survey) Converter

How to use this Fathoms (US survey) to Pica Converter πŸ€”

Follow these steps to convert given length from the units of Fathoms (US survey) to the units of Pica.

Fathoms (US survey) to Pica Converter | fath to pica
  1. Enter the input Fathoms (US survey) value in the text field.
  2. The calculator converts the given Fathoms (US survey) into Pica in realtime ⌚ using the conversion formula, and displays under the Pica label. You do not need to click any button. If the input changes, Pica value is re-calculated, just like that.
  3. You may copy the resulting Pica value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Fathoms (US survey) to Pica?

The formula to convert given length from Fathoms (US survey) to Pica is:

Length(Pica) = Length(Fathoms (US survey)) / 0.0023148101853825926

To convert any given length from fathoms (us survey) to pica, substitute the given value of Length(Fathoms (US survey)) in the above formula, simplify the right-hand side value.

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a river's depth is measured at 5 fathoms (US survey).
Convert this depth from fathoms (US survey) to Pica.

Answer:

Given:

The length in fathoms (us survey) is:

Length(Fathoms (US survey)) = 5

Formula:

The formula to convert length from fathoms (us survey) to pica is:

Length(Pica) = Length(Fathoms (US survey)) / 0.0023148101853825926

Substitution:

Substitute given weight Length(Fathoms (US survey)) = 5 in the above formula.

Length(Pica) = 5 / 0.0023148101853825926

Length(Pica) = 2160.0043

Final Answer:

Therefore, 5 fath is equal to 2160.0043 pica.

The length is 2160.0043 pica, in pica.

2

Consider that a dock extends into the sea for 8 fathoms (US survey).
Convert this length from fathoms (US survey) to Pica.

Answer:

Given:

The length in fathoms (us survey) is:

Length(Fathoms (US survey)) = 8

Formula:

The formula to convert length from fathoms (us survey) to pica is:

Length(Pica) = Length(Fathoms (US survey)) / 0.0023148101853825926

Substitution:

Substitute given weight Length(Fathoms (US survey)) = 8 in the above formula.

Length(Pica) = 8 / 0.0023148101853825926

Length(Pica) = 3456.0069

Final Answer:

Therefore, 8 fath is equal to 3456.0069 pica.

The length is 3456.0069 pica, in pica.

Fathoms (US survey) to Pica Conversion Table

The following table gives some of the most used conversions from Fathoms (US survey) to Pica.

Fathoms (US survey) (fath)Pica (pica)
0 fath0 pica
1 fath432.0009 pica
2 fath864.0017 pica
3 fath1296.0026 pica
4 fath1728.0035 pica
5 fath2160.0043 pica
6 fath2592.0052 pica
7 fath3024.006 pica
8 fath3456.0069 pica
9 fath3888.0078 pica
10 fath4320.0086 pica
20 fath8640.0173 pica
50 fath21600.0432 pica
100 fath43200.0864 pica
1000 fath432000.864 pica
10000 fath4320008.6396 pica
100000 fath43200086.3965 pica

Fathoms (US survey)

A fathom (US survey) is a unit of length used primarily in maritime contexts in the United States to measure water depth. One US survey fathom is equivalent to exactly 6 feet or approximately 1.8288 meters.

The US survey fathom is defined as 6 feet, consistent with historical maritime measurement practices and used for depth soundings and underwater measurements.

Fathoms (US survey) are utilized in navigation, fishing, and marine activities in the United States to describe water depth. The unit provides a practical measurement for underwater distances and ensures consistency in maritime practices.

Pica

A pica is a unit of length used primarily in typography and printing. One pica is equivalent to 1/6 of an inch or approximately 4.233 millimeters.

The pica is defined as 12 points, with one point being 1/72 of an inch. It is used to measure the size of type, line length, and spacing in printed materials.

Picas are commonly used in the printing and graphic design industries to ensure consistency in text layout and design. The unit provides a standard measurement for various typographic and layout tasks.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Fathoms (US survey) to Pica in Length?

2. Is this tool free or paid?

3. How do I convert Length from Fathoms (US survey) to Pica?