Feet to Twip Converter

Enter Feet


Twip





β‡… Switch toTwip to Feet Converter

How to use this Feet to Twip Converter πŸ€”

Follow these steps to convert given length from the units of Feet to the units of Twip.

Feet to Twip Converter | ft to twip
  1. Enter the input Feet value in the text field.
  2. The calculator converts the given Feet into Twip in realtime ⌚ using the conversion formula, and displays under the Twip label. You do not need to click any button. If the input changes, Twip value is re-calculated, just like that.
  3. You may copy the resulting Twip value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Feet to Twip?

The formula to convert given length from Feet to Twip is:

Length(Twip) = Length(Feet) / 0.00005787037036996207

Substitute the given value of length in feet, i.e., Length(Feet) in the above formula and simplify the right-hand side value. The resulting value is the length in twip, i.e., Length(Twip).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a luxury yacht has a beam width of 60 feet.
Convert this width from feet to Twip.

Answer:

Given:

The length in feet is:

Length(Feet) = 60

Formula:

The formula to convert length from feet to twip is:

Length(Twip) = Length(Feet) / 0.00005787037036996207

Substitution:

Substitute given weight Length(Feet) = 60 in the above formula.

Length(Twip) = 60 / 0.00005787037036996207

Length(Twip) = 1036800

Final Answer:

Therefore, 60 ft is equal to 1036800 twip.

The length is 1036800 twip, in twip.

2

Consider that a skyscraper's floor-to-ceiling height is 15 feet.
Convert this height from feet to Twip.

Answer:

Given:

The length in feet is:

Length(Feet) = 15

Formula:

The formula to convert length from feet to twip is:

Length(Twip) = Length(Feet) / 0.00005787037036996207

Substitution:

Substitute given weight Length(Feet) = 15 in the above formula.

Length(Twip) = 15 / 0.00005787037036996207

Length(Twip) = 259200

Final Answer:

Therefore, 15 ft is equal to 259200 twip.

The length is 259200 twip, in twip.

Feet to Twip Conversion Table

The following table gives some of the most used conversions from Feet to Twip.

Feet (ft)Twip (twip)
0 ft0 twip
1 ft17280 twip
2 ft34560 twip
3 ft51840 twip
4 ft69120 twip
5 ft86400 twip
6 ft103680 twip
7 ft120960 twip
8 ft138240 twip
9 ft155520 twip
10 ft172800 twip
20 ft345600 twip
50 ft864000 twip
100 ft1728000 twip
1000 ft17280000.0001 twip
10000 ft172800000.0012 twip
100000 ft1728000000.0122 twip

Feet

A foot (symbol: ft) is a unit of length used in the United States, the United Kingdom, and Canada. One foot is equal to 0.3048 meters.

The foot originated from various units used in ancient civilizations. Its current definition is based on the international agreement of 1959, which standardized it to exactly 0.3048 meters.

Feet are commonly used to measure height, length, and short distances. Despite the global shift to the metric system, the foot remains in use in these countries.

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Feet to Twip in Length?

2. Is this tool free or paid?

3. How do I convert Length from Feet to Twip?