Fingerbreadth to Links Converter

Enter Fingerbreadth


Links





β‡… Switch toLinks to Fingerbreadth Converter

How to use this Fingerbreadth to Links Converter πŸ€”

Follow these steps to convert given length from the units of Fingerbreadth to the units of Links.

  1. Enter the input Fingerbreadth value in the text field.
  2. The calculator converts the given Fingerbreadth into Links in realtime ⌚ using the conversion formula, and displays under the Links label. You do not need to click any button. If the input changes, Links value is re-calculated, just like that.
  3. You may copy the resulting Links value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Fingerbreadth to Links?

The formula to convert given length from Fingerbreadth to Links is:

Length(Links) = Length(Fingerbreadth) / 10.559999999954938

Substitute the given value of length in fingerbreadth, i.e., Length(Fingerbreadth) in the above formula and simplify the right-hand side value. The resulting value is the length in links, i.e., Length(Links).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a small object is measured to be 4 fingerbreadths wide.
Convert this width from fingerbreadths to Links.

Answer:

Given:

The length in fingerbreadth is:

Length(Fingerbreadth) = 4

Formula:

The formula to convert length from fingerbreadth to links is:

Length(Links) = Length(Fingerbreadth) / 10.559999999954938

Substitution:

Substitute given weight Length(Fingerbreadth) = 4 in the above formula.

Length(Links) = 4 / 10.559999999954938

Length(Links) = 0.3788

Final Answer:

Therefore, 4 fingerbreadth is equal to 0.3788 li.

The length is 0.3788 li, in links.

2

Consider that a narrow gap is 2 fingerbreadths wide.
Convert this width from fingerbreadths to Links.

Answer:

Given:

The length in fingerbreadth is:

Length(Fingerbreadth) = 2

Formula:

The formula to convert length from fingerbreadth to links is:

Length(Links) = Length(Fingerbreadth) / 10.559999999954938

Substitution:

Substitute given weight Length(Fingerbreadth) = 2 in the above formula.

Length(Links) = 2 / 10.559999999954938

Length(Links) = 0.1894

Final Answer:

Therefore, 2 fingerbreadth is equal to 0.1894 li.

The length is 0.1894 li, in links.

Fingerbreadth to Links Conversion Table

The following table gives some of the most used conversions from Fingerbreadth to Links.

Fingerbreadth (fingerbreadth)Links (li)
0 fingerbreadth0 li
1 fingerbreadth0.0946969697 li
2 fingerbreadth0.1894 li
3 fingerbreadth0.2841 li
4 fingerbreadth0.3788 li
5 fingerbreadth0.4735 li
6 fingerbreadth0.5682 li
7 fingerbreadth0.6629 li
8 fingerbreadth0.7576 li
9 fingerbreadth0.8523 li
10 fingerbreadth0.947 li
20 fingerbreadth1.8939 li
50 fingerbreadth4.7348 li
100 fingerbreadth9.4697 li
1000 fingerbreadth94.697 li
10000 fingerbreadth946.9697 li
100000 fingerbreadth9469.697 li

Fingerbreadth

A fingerbreadth is a historical unit of length based on the width of a person's finger. One fingerbreadth is approximately equivalent to 1 inch or about 0.0254 meters.

The fingerbreadth is defined as the width of a finger at its widest point, typically used for practical measurements in various contexts such as textiles and small dimensions.

Fingerbreadths were used in historical measurement systems to provide a simple and accessible means of measuring smaller lengths and dimensions. While not commonly used today, the unit offers insight into traditional measurement practices and standards.

Links

A link is a unit of length used primarily in land surveying and measurement. One link is equivalent to 0.66 feet or approximately 0.201168 meters.

The link is defined as one-hundredth of a chain, where one chain is 66 feet long. This unit is used for finer measurements in land surveying and mapping.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Fingerbreadth to Links in Length?

2. Is this tool free or paid?

3. How do I convert Length from Fingerbreadth to Links?