Fingers (cloth) to Feet (US survey) Converter

Enter Fingers (cloth)


Feet (US survey)





β‡… Switch toFeet (US survey) to Fingers (cloth) Converter

How to use this Fingers (cloth) to Feet (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Fingers (cloth) to the units of Feet (US survey).

  1. Enter the input Fingers (cloth) value in the text field.
  2. The calculator converts the given Fingers (cloth) into Feet (US survey) in realtime ⌚ using the conversion formula, and displays under the Feet (US survey) label. You do not need to click any button. If the input changes, Feet (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Feet (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Fingers (cloth) to Feet (US survey)?

The formula to convert given length from Fingers (cloth) to Feet (US survey) is:

Length(Feet (US survey)) = Length(Fingers (cloth)) / 2.6666720000372535

Substitute the given value of length in fingers (cloth), i.e., Length(Fingers (cloth)) in the above formula and simplify the right-hand side value. The resulting value is the length in feet (us survey), i.e., Length(Feet (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a narrow strip of fabric is 5 fingers wide.
Convert this width from fingers to Feet (US survey).

Answer:

Given:

The length in fingers (cloth) is:

Length(Fingers (cloth)) = 5

Formula:

The formula to convert length from fingers (cloth) to feet (us survey) is:

Length(Feet (US survey)) = Length(Fingers (cloth)) / 2.6666720000372535

Substitution:

Substitute given weight Length(Fingers (cloth)) = 5 in the above formula.

Length(Feet (US survey)) = 5 / 2.6666720000372535

Length(Feet (US survey)) = 1.875

Final Answer:

Therefore, 5 finger is equal to 1.875 ft.

The length is 1.875 ft, in feet (us survey).

2

Consider that a lace ribbon is 3 fingers wide.
Convert this measurement from fingers to Feet (US survey).

Answer:

Given:

The length in fingers (cloth) is:

Length(Fingers (cloth)) = 3

Formula:

The formula to convert length from fingers (cloth) to feet (us survey) is:

Length(Feet (US survey)) = Length(Fingers (cloth)) / 2.6666720000372535

Substitution:

Substitute given weight Length(Fingers (cloth)) = 3 in the above formula.

Length(Feet (US survey)) = 3 / 2.6666720000372535

Length(Feet (US survey)) = 1.125

Final Answer:

Therefore, 3 finger is equal to 1.125 ft.

The length is 1.125 ft, in feet (us survey).

Fingers (cloth) to Feet (US survey) Conversion Table

The following table gives some of the most used conversions from Fingers (cloth) to Feet (US survey).

Fingers (cloth) (finger)Feet (US survey) (ft)
0 finger0 ft
1 finger0.375 ft
2 finger0.75 ft
3 finger1.125 ft
4 finger1.5 ft
5 finger1.875 ft
6 finger2.25 ft
7 finger2.625 ft
8 finger3 ft
9 finger3.375 ft
10 finger3.75 ft
20 finger7.5 ft
50 finger18.75 ft
100 finger37.4999 ft
1000 finger374.9992 ft
10000 finger3749.9925 ft
100000 finger37499.925 ft

Fingers (cloth)

A finger (cloth) is a historical unit of length used in textiles and cloth measurement. One finger (cloth) is approximately equivalent to 1 inch or 0.0254 meters.

The finger (cloth) is based on the width of a person's finger and was used for finer measurements in fabric and textiles.

Finger (cloth) measurements were utilized in the textile industry for detailing and cutting fabric. Although it is not commonly used today, the unit provides insight into traditional textile measurement practices and historical standards.

Feet (US survey)

A foot (US survey) is a unit of length used in land surveying and mapping in the United States. One foot (US survey) is defined as exactly 1200/3937 meters, which is approximately 0.3048006096 meters or about 0.3048 meters.

The US survey foot is slightly different from the international foot, which is defined as exactly 0.3048 meters. The difference is due to historical measurement standards and is used in specific contexts such as land surveying and engineering in the United States.

US survey feet are used primarily in the United States for property measurement, land surveying, and mapping, ensuring consistency in measurements within these fields.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Fingers (cloth) to Feet (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Fingers (cloth) to Feet (US survey)?