Handbreadth to Chains (US survey) Converter

Enter Handbreadth


Chains (US survey)





β‡… Switch toChains (US survey) to Handbreadth Converter

How to use this Handbreadth to Chains (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Handbreadth to the units of Chains (US survey).

  1. Enter the input Handbreadth value in the text field.
  2. The calculator converts the given Handbreadth into Chains (US survey) in realtime ⌚ using the conversion formula, and displays under the Chains (US survey) label. You do not need to click any button. If the input changes, Chains (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Chains (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Handbreadth to Chains (US survey)?

The formula to convert given length from Handbreadth to Chains (US survey) is:

Length(Chains (US survey)) = Length(Handbreadth) / 264.00052778541993

Substitute the given value of length in handbreadth, i.e., Length(Handbreadth) in the above formula and simplify the right-hand side value. The resulting value is the length in chains (us survey), i.e., Length(Chains (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a traditional measurement for a table's width is 10 handbreadths.
Convert this width from handbreadths to Chains (US survey).

Answer:

Given:

The length in handbreadth is:

Length(Handbreadth) = 10

Formula:

The formula to convert length from handbreadth to chains (us survey) is:

Length(Chains (US survey)) = Length(Handbreadth) / 264.00052778541993

Substitution:

Substitute given weight Length(Handbreadth) = 10 in the above formula.

Length(Chains (US survey)) = 10 / 264.00052778541993

Length(Chains (US survey)) = 0.0378787121521515

Final Answer:

Therefore, 10 handbreadth is equal to 0.0378787121521515 ch.

The length is 0.0378787121521515 ch, in chains (us survey).

2

Consider that a door is 6 handbreadths wide.
Convert this width from handbreadths to Chains (US survey).

Answer:

Given:

The length in handbreadth is:

Length(Handbreadth) = 6

Formula:

The formula to convert length from handbreadth to chains (us survey) is:

Length(Chains (US survey)) = Length(Handbreadth) / 264.00052778541993

Substitution:

Substitute given weight Length(Handbreadth) = 6 in the above formula.

Length(Chains (US survey)) = 6 / 264.00052778541993

Length(Chains (US survey)) = 0.0227272272912909

Final Answer:

Therefore, 6 handbreadth is equal to 0.0227272272912909 ch.

The length is 0.0227272272912909 ch, in chains (us survey).

Handbreadth to Chains (US survey) Conversion Table

The following table gives some of the most used conversions from Handbreadth to Chains (US survey).

Handbreadth (handbreadth)Chains (US survey) (ch)
0 handbreadth0 ch
1 handbreadth0.00378787122 ch
2 handbreadth0.00757574243 ch
3 handbreadth0.01136361365 ch
4 handbreadth0.01515148486 ch
5 handbreadth0.01893935608 ch
6 handbreadth0.02272722729 ch
7 handbreadth0.02651509851 ch
8 handbreadth0.03030296972 ch
9 handbreadth0.03409084094 ch
10 handbreadth0.03787871215 ch
20 handbreadth0.0757574243 ch
50 handbreadth0.1894 ch
100 handbreadth0.3788 ch
1000 handbreadth3.7879 ch
10000 handbreadth37.8787 ch
100000 handbreadth378.7871 ch

Handbreadth

A handbreadth is a historical unit of length used to measure small distances, typically based on the width of a hand. One handbreadth is approximately equivalent to 4 inches or about 0.1016 meters.

The handbreadth is defined as the width of a person's hand, measured from the edge of the thumb to the edge of the little finger when the hand is spread out. This unit was used for practical measurements in various contexts, including textiles and construction.

Handbreadths were used in historical measurement systems for assessing lengths and dimensions where precise tools were not available. Although less common today, the unit provides historical context for traditional measurement practices and everyday use in different cultures.

Chains (US survey)

A chain (US survey) is a unit of length used primarily in land surveying in the United States. One US survey chain is equivalent to exactly 66 feet or approximately 20.1168 meters.

The US survey chain is defined as 66 feet, based on historical surveying practices and used for measuring and plotting land.

Chains (US survey) are used in land surveying for tasks such as property measurement, land division, and mapping in the United States. This unit ensures consistency and accuracy in surveying and land measurement activities.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Handbreadth to Chains (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Handbreadth to Chains (US survey)?