Handbreadth to link (US survey) Converter

Enter Handbreadth


link (US survey)





β‡… Switch tolink (US survey) to Handbreadth Converter

How to use this Handbreadth to link (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Handbreadth to the units of link (US survey).

  1. Enter the input Handbreadth value in the text field.
  2. The calculator converts the given Handbreadth into link (US survey) in realtime ⌚ using the conversion formula, and displays under the link (US survey) label. You do not need to click any button. If the input changes, link (US survey) value is re-calculated, just like that.
  3. You may copy the resulting link (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Handbreadth to link (US survey)?

The formula to convert given length from Handbreadth to link (US survey) is:

Length(link (US survey)) = Length(Handbreadth) / 2.640005279978542

Substitute the given value of length in handbreadth, i.e., Length(Handbreadth) in the above formula and simplify the right-hand side value. The resulting value is the length in link (us survey), i.e., Length(link (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a traditional measurement for a table's width is 10 handbreadths.
Convert this width from handbreadths to link (US survey).

Answer:

Given:

The length in handbreadth is:

Length(Handbreadth) = 10

Formula:

The formula to convert length from handbreadth to link (us survey) is:

Length(link (US survey)) = Length(Handbreadth) / 2.640005279978542

Substitution:

Substitute given weight Length(Handbreadth) = 10 in the above formula.

Length(link (US survey)) = 10 / 2.640005279978542

Length(link (US survey)) = 3.7879

Final Answer:

Therefore, 10 handbreadth is equal to 3.7879 li.

The length is 3.7879 li, in link (us survey).

2

Consider that a door is 6 handbreadths wide.
Convert this width from handbreadths to link (US survey).

Answer:

Given:

The length in handbreadth is:

Length(Handbreadth) = 6

Formula:

The formula to convert length from handbreadth to link (us survey) is:

Length(link (US survey)) = Length(Handbreadth) / 2.640005279978542

Substitution:

Substitute given weight Length(Handbreadth) = 6 in the above formula.

Length(link (US survey)) = 6 / 2.640005279978542

Length(link (US survey)) = 2.2727

Final Answer:

Therefore, 6 handbreadth is equal to 2.2727 li.

The length is 2.2727 li, in link (us survey).

Handbreadth to link (US survey) Conversion Table

The following table gives some of the most used conversions from Handbreadth to link (US survey).

Handbreadth (handbreadth)link (US survey) (li)
0 handbreadth0 li
1 handbreadth0.3788 li
2 handbreadth0.7576 li
3 handbreadth1.1364 li
4 handbreadth1.5151 li
5 handbreadth1.8939 li
6 handbreadth2.2727 li
7 handbreadth2.6515 li
8 handbreadth3.0303 li
9 handbreadth3.4091 li
10 handbreadth3.7879 li
20 handbreadth7.5757 li
50 handbreadth18.9394 li
100 handbreadth37.8787 li
1000 handbreadth378.7871 li
10000 handbreadth3787.8712 li
100000 handbreadth37878.7121 li

Handbreadth

A handbreadth is a historical unit of length used to measure small distances, typically based on the width of a hand. One handbreadth is approximately equivalent to 4 inches or about 0.1016 meters.

The handbreadth is defined as the width of a person's hand, measured from the edge of the thumb to the edge of the little finger when the hand is spread out. This unit was used for practical measurements in various contexts, including textiles and construction.

Handbreadths were used in historical measurement systems for assessing lengths and dimensions where precise tools were not available. Although less common today, the unit provides historical context for traditional measurement practices and everyday use in different cultures.

link (US survey)

A link (US survey) is a unit of length used primarily in land surveying in the United States. One US survey link is equivalent to exactly 0.66 feet or approximately 0.201168 meters.

The US survey link is defined as one-hundredth of a US survey chain, where one US survey chain is 66 feet long. This unit provides precision for finer measurements in land surveying and mapping.

Links (US survey) are used in land surveying to measure shorter distances and ensure accuracy in property measurement and mapping activities in the United States.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Handbreadth to link (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Handbreadth to link (US survey)?