Kens to Rods (US survey) Converter

Enter Kens


Rods (US survey)





β‡… Switch toRods (US survey) to Kens Converter

How to use this Kens to Rods (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Kens to the units of Rods (US survey).

Kens to Rods (US survey) Converter | ken to rd
  1. Enter the input Kens value in the text field.
  2. The calculator converts the given Kens into Rods (US survey) in realtime ⌚ using the conversion formula, and displays under the Rods (US survey) label. You do not need to click any button. If the input changes, Rods (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Rods (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Kens to Rods (US survey)?

The formula to convert given length from Kens to Rods (US survey) is:

Length(Rods (US survey)) = Length(Kens) / 2.374105467859873

Substitute the given value of length in kens, i.e., Length(Kens) in the above formula and simplify the right-hand side value. The resulting value is the length in rods (us survey), i.e., Length(Rods (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a traditional Japanese building is 3 kens wide.
Convert this width from kens to Rods (US survey).

Answer:

Given:

The length in kens is:

Length(Kens) = 3

Formula:

The formula to convert length from kens to rods (us survey) is:

Length(Rods (US survey)) = Length(Kens) / 2.374105467859873

Substitution:

Substitute given weight Length(Kens) = 3 in the above formula.

Length(Rods (US survey)) = 3 / 2.374105467859873

Length(Rods (US survey)) = 1.2636

Final Answer:

Therefore, 3 ken is equal to 1.2636 rd.

The length is 1.2636 rd, in rods (us survey).

2

Consider that a Japanese temple's hall is 5 kens long.
Convert this length from kens to Rods (US survey).

Answer:

Given:

The length in kens is:

Length(Kens) = 5

Formula:

The formula to convert length from kens to rods (us survey) is:

Length(Rods (US survey)) = Length(Kens) / 2.374105467859873

Substitution:

Substitute given weight Length(Kens) = 5 in the above formula.

Length(Rods (US survey)) = 5 / 2.374105467859873

Length(Rods (US survey)) = 2.1061

Final Answer:

Therefore, 5 ken is equal to 2.1061 rd.

The length is 2.1061 rd, in rods (us survey).

Kens to Rods (US survey) Conversion Table

The following table gives some of the most used conversions from Kens to Rods (US survey).

Kens (ken)Rods (US survey) (rd)
0 ken0 rd
1 ken0.4212 rd
2 ken0.8424 rd
3 ken1.2636 rd
4 ken1.6848 rd
5 ken2.1061 rd
6 ken2.5273 rd
7 ken2.9485 rd
8 ken3.3697 rd
9 ken3.7909 rd
10 ken4.2121 rd
20 ken8.4242 rd
50 ken21.0606 rd
100 ken42.1211 rd
1000 ken421.2113 rd
10000 ken4212.1128 rd
100000 ken42121.1279 rd

Kens

A ken is a historical unit of length used in various cultures, particularly in Asia. The length of a ken can vary depending on the region and context. In Japan, one ken is approximately equivalent to 6 feet or about 1.8288 meters.

The ken was traditionally used in architectural and construction measurements, particularly in the design of buildings and layout of spaces.

Ken measurements were utilized in historical architecture and construction practices in Asian cultures. Although not commonly used today, the unit provides historical context for traditional measurement standards and practices in building and design.

Rods (US survey)

A rod (US survey) is a unit of length used primarily in land surveying in the United States. One US survey rod is equivalent to exactly 16.5 feet or approximately 5.0292 meters.

The US survey rod is defined as 16.5 feet, based on historical surveying practices and used for measuring and plotting land.

Rods (US survey) are used in land surveying, property measurement, and agricultural practices in the United States. The unit ensures consistency and accuracy in measuring shorter distances within these fields.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Kens to Rods (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Kens to Rods (US survey)?