Links to Twip Converter

Enter Links


Twip





β‡… Switch toTwip to Links Converter

How to use this Links to Twip Converter πŸ€”

Follow these steps to convert given length from the units of Links to the units of Twip.

Links to Twip Converter | li to twip
  1. Enter the input Links value in the text field.
  2. The calculator converts the given Links into Twip in realtime ⌚ using the conversion formula, and displays under the Twip label. You do not need to click any button. If the input changes, Twip value is re-calculated, just like that.
  3. You may copy the resulting Twip value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Links to Twip?

The formula to convert given length from Links to Twip is:

Length(Twip) = Length(Links) / 0.00008768237934880154

Substitute the given value of length in links, i.e., Length(Links) in the above formula and simplify the right-hand side value. The resulting value is the length in twip, i.e., Length(Twip).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a surveyor's chain is divided into 100 links, with each link being 1 link in length.
Convert this length from links to Twip.

Answer:

Given:

The length in links is:

Length(Links) = 1

Formula:

The formula to convert length from links to twip is:

Length(Twip) = Length(Links) / 0.00008768237934880154

Substitution:

Substitute given weight Length(Links) = 1 in the above formula.

Length(Twip) = 1 / 0.00008768237934880154

Length(Twip) = 11404.8

Final Answer:

Therefore, 1 li is equal to 11404.8 twip.

The length is 11404.8 twip, in twip.

2

Consider that a measurement in a survey reads 50 links.
Convert this length from links to Twip.

Answer:

Given:

The length in links is:

Length(Links) = 50

Formula:

The formula to convert length from links to twip is:

Length(Twip) = Length(Links) / 0.00008768237934880154

Substitution:

Substitute given weight Length(Links) = 50 in the above formula.

Length(Twip) = 50 / 0.00008768237934880154

Length(Twip) = 570240

Final Answer:

Therefore, 50 li is equal to 570240 twip.

The length is 570240 twip, in twip.

Links to Twip Conversion Table

The following table gives some of the most used conversions from Links to Twip.

Links (li)Twip (twip)
0 li0 twip
1 li11404.8 twip
2 li22809.6 twip
3 li34214.4 twip
4 li45619.2 twip
5 li57024 twip
6 li68428.8 twip
7 li79833.6 twip
8 li91238.4 twip
9 li102643.2 twip
10 li114048 twip
20 li228096 twip
50 li570240 twip
100 li1140480 twip
1000 li11404800 twip
10000 li114048000.0003 twip
100000 li1140480000.0032 twip

Links

A link is a unit of length used primarily in land surveying and measurement. One link is equivalent to 0.66 feet or approximately 0.201168 meters.

The link is defined as one-hundredth of a chain, where one chain is 66 feet long. This unit is used for finer measurements in land surveying and mapping.

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Links to Twip in Length?

2. Is this tool free or paid?

3. How do I convert Length from Links to Twip?