link (US survey) to Fingerbreadth Converter

Enter link (US survey)


Fingerbreadth





β‡… Switch toFingerbreadth to link (US survey) Converter

How to use this link (US survey) to Fingerbreadth Converter πŸ€”

Follow these steps to convert given length from the units of link (US survey) to the units of Fingerbreadth.

  1. Enter the input link (US survey) value in the text field.
  2. The calculator converts the given link (US survey) into Fingerbreadth in realtime ⌚ using the conversion formula, and displays under the Fingerbreadth label. You do not need to click any button. If the input changes, Fingerbreadth value is re-calculated, just like that.
  3. You may copy the resulting Fingerbreadth value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert link (US survey) to Fingerbreadth?

The formula to convert given length from link (US survey) to Fingerbreadth is:

Length(Fingerbreadth) = Length(link (US survey)) / 0.09469678030417879

Substitute the given value of length in link (us survey), i.e., Length(link (US survey)) in the above formula and simplify the right-hand side value. The resulting value is the length in fingerbreadth, i.e., Length(Fingerbreadth).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a piece of land is measured at 80 links (US survey).
Convert this length from links (US survey) to Fingerbreadth.

Answer:

Given:

The length in link (us survey) is:

Length(link (US survey)) = 80

Formula:

The formula to convert length from link (us survey) to fingerbreadth is:

Length(Fingerbreadth) = Length(link (US survey)) / 0.09469678030417879

Substitution:

Substitute given weight Length(link (US survey)) = 80 in the above formula.

Length(Fingerbreadth) = 80 / 0.09469678030417879

Length(Fingerbreadth) = 844.8017

Final Answer:

Therefore, 80 li is equal to 844.8017 fingerbreadth.

The length is 844.8017 fingerbreadth, in fingerbreadth.

2

Consider that a boundary marker is set 30 links (US survey) from the starting point.
Convert this distance from links (US survey) to Fingerbreadth.

Answer:

Given:

The length in link (us survey) is:

Length(link (US survey)) = 30

Formula:

The formula to convert length from link (us survey) to fingerbreadth is:

Length(Fingerbreadth) = Length(link (US survey)) / 0.09469678030417879

Substitution:

Substitute given weight Length(link (US survey)) = 30 in the above formula.

Length(Fingerbreadth) = 30 / 0.09469678030417879

Length(Fingerbreadth) = 316.8006

Final Answer:

Therefore, 30 li is equal to 316.8006 fingerbreadth.

The length is 316.8006 fingerbreadth, in fingerbreadth.

link (US survey) to Fingerbreadth Conversion Table

The following table gives some of the most used conversions from link (US survey) to Fingerbreadth.

link (US survey) (li)Fingerbreadth (fingerbreadth)
0 li0 fingerbreadth
1 li10.56 fingerbreadth
2 li21.12 fingerbreadth
3 li31.6801 fingerbreadth
4 li42.2401 fingerbreadth
5 li52.8001 fingerbreadth
6 li63.3601 fingerbreadth
7 li73.9201 fingerbreadth
8 li84.4802 fingerbreadth
9 li95.0402 fingerbreadth
10 li105.6002 fingerbreadth
20 li211.2004 fingerbreadth
50 li528.0011 fingerbreadth
100 li1056.0021 fingerbreadth
1000 li10560.0211 fingerbreadth
10000 li105600.2112 fingerbreadth
100000 li1056002.112 fingerbreadth

link (US survey)

A link (US survey) is a unit of length used primarily in land surveying in the United States. One US survey link is equivalent to exactly 0.66 feet or approximately 0.201168 meters.

The US survey link is defined as one-hundredth of a US survey chain, where one US survey chain is 66 feet long. This unit provides precision for finer measurements in land surveying and mapping.

Links (US survey) are used in land surveying to measure shorter distances and ensure accuracy in property measurement and mapping activities in the United States.

Fingerbreadth

A fingerbreadth is a historical unit of length based on the width of a person's finger. One fingerbreadth is approximately equivalent to 1 inch or about 0.0254 meters.

The fingerbreadth is defined as the width of a finger at its widest point, typically used for practical measurements in various contexts such as textiles and small dimensions.

Fingerbreadths were used in historical measurement systems to provide a simple and accessible means of measuring smaller lengths and dimensions. While not commonly used today, the unit offers insight into traditional measurement practices and standards.

Frequently Asked Questions (FAQs)

1. What is the formula for converting link (US survey) to Fingerbreadth in Length?

2. Is this tool free or paid?

3. How do I convert Length from link (US survey) to Fingerbreadth?