link (US survey) to Twip Converter

Enter link (US survey)


Twip





β‡… Switch toTwip to link (US survey) Converter

How to use this link (US survey) to Twip Converter πŸ€”

Follow these steps to convert given length from the units of link (US survey) to the units of Twip.

link (US survey) to Twip Converter | li to twip
  1. Enter the input link (US survey) value in the text field.
  2. The calculator converts the given link (US survey) into Twip in realtime ⌚ using the conversion formula, and displays under the Twip label. You do not need to click any button. If the input changes, Twip value is re-calculated, just like that.
  3. You may copy the resulting Twip value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert link (US survey) to Twip?

The formula to convert given length from link (US survey) to Twip is:

Length(Twip) = Length(link (US survey)) / 0.00008768220398473208

Substitute the given value of length in link (us survey), i.e., Length(link (US survey)) in the above formula and simplify the right-hand side value. The resulting value is the length in twip, i.e., Length(Twip).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a piece of land is measured at 80 links (US survey).
Convert this length from links (US survey) to Twip.

Answer:

Given:

The length in link (us survey) is:

Length(link (US survey)) = 80

Formula:

The formula to convert length from link (us survey) to twip is:

Length(Twip) = Length(link (US survey)) / 0.00008768220398473208

Substitution:

Substitute given weight Length(link (US survey)) = 80 in the above formula.

Length(Twip) = 80 / 0.00008768220398473208

Length(Twip) = 912385.8248

Final Answer:

Therefore, 80 li is equal to 912385.8248 twip.

The length is 912385.8248 twip, in twip.

2

Consider that a boundary marker is set 30 links (US survey) from the starting point.
Convert this distance from links (US survey) to Twip.

Answer:

Given:

The length in link (us survey) is:

Length(link (US survey)) = 30

Formula:

The formula to convert length from link (us survey) to twip is:

Length(Twip) = Length(link (US survey)) / 0.00008768220398473208

Substitution:

Substitute given weight Length(link (US survey)) = 30 in the above formula.

Length(Twip) = 30 / 0.00008768220398473208

Length(Twip) = 342144.6843

Final Answer:

Therefore, 30 li is equal to 342144.6843 twip.

The length is 342144.6843 twip, in twip.

link (US survey) to Twip Conversion Table

The following table gives some of the most used conversions from link (US survey) to Twip.

link (US survey) (li)Twip (twip)
0 li0 twip
1 li11404.8228 twip
2 li22809.6456 twip
3 li34214.4684 twip
4 li45619.2912 twip
5 li57024.114 twip
6 li68428.9369 twip
7 li79833.7597 twip
8 li91238.5825 twip
9 li102643.4053 twip
10 li114048.2281 twip
20 li228096.4562 twip
50 li570241.1405 twip
100 li1140482.281 twip
1000 li11404822.8096 twip
10000 li114048228.0959 twip
100000 li1140482280.9588 twip

link (US survey)

A link (US survey) is a unit of length used primarily in land surveying in the United States. One US survey link is equivalent to exactly 0.66 feet or approximately 0.201168 meters.

The US survey link is defined as one-hundredth of a US survey chain, where one US survey chain is 66 feet long. This unit provides precision for finer measurements in land surveying and mapping.

Links (US survey) are used in land surveying to measure shorter distances and ensure accuracy in property measurement and mapping activities in the United States.

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Frequently Asked Questions (FAQs)

1. What is the formula for converting link (US survey) to Twip in Length?

2. Is this tool free or paid?

3. How do I convert Length from link (US survey) to Twip?