Poles to Twip Converter

Enter Poles


Twip





β‡… Switch toTwip to Poles Converter

How to use this Poles to Twip Converter πŸ€”

Follow these steps to convert given length from the units of Poles to the units of Twip.

Poles to Twip Converter | pole to twip
  1. Enter the input Poles value in the text field.
  2. The calculator converts the given Poles into Twip in realtime ⌚ using the conversion formula, and displays under the Twip label. You do not need to click any button. If the input changes, Twip value is re-calculated, just like that.
  3. You may copy the resulting Twip value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Poles to Twip?

The formula to convert given length from Poles to Twip is:

Length(Twip) = Length(Poles) / 0.0000035072951736698388

Substitute the given value of length in poles, i.e., Length(Poles) in the above formula and simplify the right-hand side value. The resulting value is the length in twip, i.e., Length(Twip).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a property boundary is marked as 10 poles long.
Convert this distance from poles to Twip.

Answer:

Given:

The length in poles is:

Length(Poles) = 10

Formula:

The formula to convert length from poles to twip is:

Length(Twip) = Length(Poles) / 0.0000035072951736698388

Substitution:

Substitute given weight Length(Poles) = 10 in the above formula.

Length(Twip) = 10 / 0.0000035072951736698388

Length(Twip) = 2851200.0002

Final Answer:

Therefore, 10 pole is equal to 2851200.0002 twip.

The length is 2851200.0002 twip, in twip.

2

Consider that a garden fence is constructed at a length of 20 poles.
Convert this length from poles to Twip.

Answer:

Given:

The length in poles is:

Length(Poles) = 20

Formula:

The formula to convert length from poles to twip is:

Length(Twip) = Length(Poles) / 0.0000035072951736698388

Substitution:

Substitute given weight Length(Poles) = 20 in the above formula.

Length(Twip) = 20 / 0.0000035072951736698388

Length(Twip) = 5702400.0005

Final Answer:

Therefore, 20 pole is equal to 5702400.0005 twip.

The length is 5702400.0005 twip, in twip.

Poles to Twip Conversion Table

The following table gives some of the most used conversions from Poles to Twip.

Poles (pole)Twip (twip)
0 pole0 twip
1 pole285120 twip
2 pole570240 twip
3 pole855360.0001 twip
4 pole1140480.0001 twip
5 pole1425600.0001 twip
6 pole1710720.0001 twip
7 pole1995840.0002 twip
8 pole2280960.0002 twip
9 pole2566080.0002 twip
10 pole2851200.0002 twip
20 pole5702400.0005 twip
50 pole14256000.0012 twip
100 pole28512000.0024 twip
1000 pole285120000.0237 twip
10000 pole2851200000.2374 twip
100000 pole28512000002.3738 twip

Poles

A pole is a unit of length used primarily in land measurement and surveying. One pole is equivalent to 16.5 feet or approximately 5.0292 meters.

The pole is defined as 16.5 feet, which is the same length as a rod or a perch, and is used in various practical applications such as land measurement and construction.

Poles are used in land surveying, property measurement, and agricultural contexts. The unit provides a practical measurement for shorter distances and has historical significance in land measurement practices.

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Poles to Twip in Length?

2. Is this tool free or paid?

3. How do I convert Length from Poles to Twip?