Follow these steps to convert given length from the units of Reed to the units of Arpent.
Enter the input Reed value in the text field.
The calculator converts the given Reed into Arpent in realtime β using the conversion formula, and displays under the Arpent label. You do not need to click any button. If the input changes, Arpent value is re-calculated, just like that.
You may copy the resulting Arpent value using the Copy button.
To view a detailed step by step calculation of the conversion, click on the View Calculation button.
You can also reset the input by clicking on Reset button present below the input field.
What is the Formula to convert Reed to Arpent?
The formula to convert given length from Reed to Arpent is:
Length(Arpent) = Length(Reed) / 21.33333331577685
Substitute the given value of length in reed, i.e., Length(Reed) in the above formula and simplify the right-hand side value. The resulting value is the length in arpent, i.e., Length(Arpent).
Calculation
Calculation will be done after you enter a valid input.
Examples
1
Consider that a plot of land is measured to be 7 reeds in length. Convert this length from reeds to Arpent.
Answer:
Given:
The length in reed is:
Length(Reed) = 7
Formula:
The formula to convert length from reed to arpent is:
Length(Arpent) = Length(Reed) / 21.33333331577685
Substitution:
Substitute given weight Length(Reed) = 7 in the above formula.
Length(Arpent) = 7 / 21.33333331577685
Length(Arpent) = 0.3281
Final Answer:
Therefore, 7 reed is equal to 0.3281 arpent.
The length is 0.3281 arpent, in arpent.
2
Consider that a water channel is dug with a width of 3 reeds. Convert this width from reeds to Arpent.
Answer:
Given:
The length in reed is:
Length(Reed) = 3
Formula:
The formula to convert length from reed to arpent is:
Length(Arpent) = Length(Reed) / 21.33333331577685
Substitution:
Substitute given weight Length(Reed) = 3 in the above formula.
Length(Arpent) = 3 / 21.33333331577685
Length(Arpent) = 0.1406
Final Answer:
Therefore, 3 reed is equal to 0.1406 arpent.
The length is 0.1406 arpent, in arpent.
Reed to Arpent Conversion Table
The following table gives some of the most used conversions from Reed to Arpent.
Reed (reed)
Arpent (arpent)
0 reed
0 arpent
1 reed
0.04687500004arpent
2 reed
0.09375000008arpent
3 reed
0.1406arpent
4 reed
0.1875arpent
5 reed
0.2344arpent
6 reed
0.2813arpent
7 reed
0.3281arpent
8 reed
0.375arpent
9 reed
0.4219arpent
10 reed
0.4688arpent
20 reed
0.9375arpent
50 reed
2.3438arpent
100 reed
4.6875arpent
1000 reed
46.875arpent
10000 reed
468.75arpent
100000 reed
4687.5arpent
Reed
A reed is a historical unit of length used in various cultures for land measurement and construction. One reed is approximately equivalent to 2.5 to 3 meters or about 8.2 to 9.8 feet.
The exact length of a reed could vary depending on the region and historical period, as it was based on practical measurements of the length of a reed or a similar natural material used for measuring distances.
Reeds were used in historical land surveying, agriculture, and construction. Although not commonly used today, the unit provides historical context for traditional measurement practices and the use of natural materials in measurement systems.
Arpent
An arpent is a historical unit of length used primarily in French-speaking regions and in land measurement. One arpent is approximately equivalent to 192.75 feet or 58.66 meters.
The arpent was used in various regions, including France and the former French colonies, to measure land and property. Its length could vary slightly depending on the specific region and historical context.
Arpents were used in land surveying and agriculture, particularly in historical and regional contexts. Although less common today, the unit provides historical insight into land measurement practices and regional variations in measurement standards.
Frequently Asked Questions (FAQs)
1. What is the formula for converting Reed to Arpent in Length?
The formula to convert Reed to Arpent in Length is:
Reed / 21.33333331577685
2. Is this tool free or paid?
This Length conversion tool, which converts Reed to Arpent, is completely free to use.
3. How do I convert Length from Reed to Arpent?
To convert Length from Reed to Arpent, you can use the following formula:
Reed / 21.33333331577685
For example, if you have a value in Reed, you substitute that value in place of Reed in the above formula, and solve the mathematical expression to get the equivalent value in Arpent.
ConvertOnline