Reed to Chains (US survey) Converter

Enter Reed


Chains (US survey)





β‡… Switch toChains (US survey) to Reed Converter

How to use this Reed to Chains (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Reed to the units of Chains (US survey).

Reed to Chains (US survey) Converter | reed to ch
  1. Enter the input Reed value in the text field.
  2. The calculator converts the given Reed into Chains (US survey) in realtime ⌚ using the conversion formula, and displays under the Chains (US survey) label. You do not need to click any button. If the input changes, Chains (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Chains (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Reed to Chains (US survey)?

The formula to convert given length from Reed to Chains (US survey) is:

Length(Chains (US survey)) = Length(Reed) / 7.333347993815922

Substitute the given value of length in reed, i.e., Length(Reed) in the above formula and simplify the right-hand side value. The resulting value is the length in chains (us survey), i.e., Length(Chains (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a plot of land is measured to be 7 reeds in length.
Convert this length from reeds to Chains (US survey).

Answer:

Given:

The length in reed is:

Length(Reed) = 7

Formula:

The formula to convert length from reed to chains (us survey) is:

Length(Chains (US survey)) = Length(Reed) / 7.333347993815922

Substitution:

Substitute given weight Length(Reed) = 7 in the above formula.

Length(Chains (US survey)) = 7 / 7.333347993815922

Length(Chains (US survey)) = 0.9545

Final Answer:

Therefore, 7 reed is equal to 0.9545 ch.

The length is 0.9545 ch, in chains (us survey).

2

Consider that a water channel is dug with a width of 3 reeds.
Convert this width from reeds to Chains (US survey).

Answer:

Given:

The length in reed is:

Length(Reed) = 3

Formula:

The formula to convert length from reed to chains (us survey) is:

Length(Chains (US survey)) = Length(Reed) / 7.333347993815922

Substitution:

Substitute given weight Length(Reed) = 3 in the above formula.

Length(Chains (US survey)) = 3 / 7.333347993815922

Length(Chains (US survey)) = 0.4091

Final Answer:

Therefore, 3 reed is equal to 0.4091 ch.

The length is 0.4091 ch, in chains (us survey).

Reed to Chains (US survey) Conversion Table

The following table gives some of the most used conversions from Reed to Chains (US survey).

Reed (reed)Chains (US survey) (ch)
0 reed0 ch
1 reed0.1364 ch
2 reed0.2727 ch
3 reed0.4091 ch
4 reed0.5455 ch
5 reed0.6818 ch
6 reed0.8182 ch
7 reed0.9545 ch
8 reed1.0909 ch
9 reed1.2273 ch
10 reed1.3636 ch
20 reed2.7273 ch
50 reed6.8182 ch
100 reed13.6363 ch
1000 reed136.3634 ch
10000 reed1363.6336 ch
100000 reed13636.3364 ch

Reed

A reed is a historical unit of length used in various cultures for land measurement and construction. One reed is approximately equivalent to 2.5 to 3 meters or about 8.2 to 9.8 feet.

The exact length of a reed could vary depending on the region and historical period, as it was based on practical measurements of the length of a reed or a similar natural material used for measuring distances.

Reeds were used in historical land surveying, agriculture, and construction. Although not commonly used today, the unit provides historical context for traditional measurement practices and the use of natural materials in measurement systems.

Chains (US survey)

A chain (US survey) is a unit of length used primarily in land surveying in the United States. One US survey chain is equivalent to exactly 66 feet or approximately 20.1168 meters.

The US survey chain is defined as 66 feet, based on historical surveying practices and used for measuring and plotting land.

Chains (US survey) are used in land surveying for tasks such as property measurement, land division, and mapping in the United States. This unit ensures consistency and accuracy in surveying and land measurement activities.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Reed to Chains (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Reed to Chains (US survey)?