Reed to link (US survey) Converter

Enter Reed


link (US survey)





β‡… Switch tolink (US survey) to Reed Converter

How to use this Reed to link (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of Reed to the units of link (US survey).

Reed to link (US survey) Converter | reed to li
  1. Enter the input Reed value in the text field.
  2. The calculator converts the given Reed into link (US survey) in realtime ⌚ using the conversion formula, and displays under the link (US survey) label. You do not need to click any button. If the input changes, link (US survey) value is re-calculated, just like that.
  3. You may copy the resulting link (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Reed to link (US survey)?

The formula to convert given length from Reed to link (US survey) is:

Length(link (US survey)) = Length(Reed) / 0.07333347999716873

Substitute the given value of length in reed, i.e., Length(Reed) in the above formula and simplify the right-hand side value. The resulting value is the length in link (us survey), i.e., Length(link (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a plot of land is measured to be 7 reeds in length.
Convert this length from reeds to link (US survey).

Answer:

Given:

The length in reed is:

Length(Reed) = 7

Formula:

The formula to convert length from reed to link (us survey) is:

Length(link (US survey)) = Length(Reed) / 0.07333347999716873

Substitution:

Substitute given weight Length(Reed) = 7 in the above formula.

Length(link (US survey)) = 7 / 0.07333347999716873

Length(link (US survey)) = 95.4544

Final Answer:

Therefore, 7 reed is equal to 95.4544 li.

The length is 95.4544 li, in link (us survey).

2

Consider that a water channel is dug with a width of 3 reeds.
Convert this width from reeds to link (US survey).

Answer:

Given:

The length in reed is:

Length(Reed) = 3

Formula:

The formula to convert length from reed to link (us survey) is:

Length(link (US survey)) = Length(Reed) / 0.07333347999716873

Substitution:

Substitute given weight Length(Reed) = 3 in the above formula.

Length(link (US survey)) = 3 / 0.07333347999716873

Length(link (US survey)) = 40.909

Final Answer:

Therefore, 3 reed is equal to 40.909 li.

The length is 40.909 li, in link (us survey).

Reed to link (US survey) Conversion Table

The following table gives some of the most used conversions from Reed to link (US survey).

Reed (reed)link (US survey) (li)
0 reed0 li
1 reed13.6363 li
2 reed27.2727 li
3 reed40.909 li
4 reed54.5453 li
5 reed68.1817 li
6 reed81.818 li
7 reed95.4544 li
8 reed109.0907 li
9 reed122.727 li
10 reed136.3634 li
20 reed272.7267 li
50 reed681.8168 li
100 reed1363.6336 li
1000 reed13636.3364 li
10000 reed136363.3636 li
100000 reed1363633.6364 li

Reed

A reed is a historical unit of length used in various cultures for land measurement and construction. One reed is approximately equivalent to 2.5 to 3 meters or about 8.2 to 9.8 feet.

The exact length of a reed could vary depending on the region and historical period, as it was based on practical measurements of the length of a reed or a similar natural material used for measuring distances.

Reeds were used in historical land surveying, agriculture, and construction. Although not commonly used today, the unit provides historical context for traditional measurement practices and the use of natural materials in measurement systems.

link (US survey)

A link (US survey) is a unit of length used primarily in land surveying in the United States. One US survey link is equivalent to exactly 0.66 feet or approximately 0.201168 meters.

The US survey link is defined as one-hundredth of a US survey chain, where one US survey chain is 66 feet long. This unit provides precision for finer measurements in land surveying and mapping.

Links (US survey) are used in land surveying to measure shorter distances and ensure accuracy in property measurement and mapping activities in the United States.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Reed to link (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from Reed to link (US survey)?