Reed to Rod Converter
β
Switch toRod to Reed ConverterHow to use this Reed to Rod Converter π€
Follow these steps to convert given length from the units of Reed to the units of Rod.
- Enter the input Reed value in the text field.
- The calculator converts the given Reed into Rod in realtime β using the conversion formula, and displays under the Rod label. You do not need to click any button. If the input changes, Rod value is re-calculated, just like that.
- You may copy the resulting Rod value using the Copy button.
- To view a detailed step by step calculation of the conversion, click on the View Calculation button.
- You can also reset the input by clicking on Reset button present below the input field.
Calculation
Calculation will be done after you enter a valid input.
Examples
1
Consider that a plot of land is measured to be 7 reeds in length.
Convert this length from reeds to Rod.
Answer:
Given:
The length in reed is:
Length(Reed) = 7
Formula:
The formula to convert length from reed to rod is:
Length(Rod) = Length(Reed) / 1.8333333334171533
Substitution:
Substitute given weight Length(Reed) = 7 in the above formula.
Length(Rod) = 7 / 1.8333333334171533
Length(Rod) = 3.8182
Final Answer:
Therefore, 7 reed is equal to 3.8182 rd.
The length is 3.8182 rd, in rod.
2
Consider that a water channel is dug with a width of 3 reeds.
Convert this width from reeds to Rod.
Answer:
Given:
The length in reed is:
Length(Reed) = 3
Formula:
The formula to convert length from reed to rod is:
Length(Rod) = Length(Reed) / 1.8333333334171533
Substitution:
Substitute given weight Length(Reed) = 3 in the above formula.
Length(Rod) = 3 / 1.8333333334171533
Length(Rod) = 1.6364
Final Answer:
Therefore, 3 reed is equal to 1.6364 rd.
The length is 1.6364 rd, in rod.
Reed to Rod Conversion Table
The following table gives some of the most used conversions from Reed to Rod.
| Reed (reed) | Rod (rd) |
|---|
|
| 0 reed | 0 rd |
| 1 reed | 0.5455 rd |
| 2 reed | 1.0909 rd |
| 3 reed | 1.6364 rd |
| 4 reed | 2.1818 rd |
| 5 reed | 2.7273 rd |
| 6 reed | 3.2727 rd |
| 7 reed | 3.8182 rd |
| 8 reed | 4.3636 rd |
| 9 reed | 4.9091 rd |
| 10 reed | 5.4545 rd |
| 20 reed | 10.9091 rd |
| 50 reed | 27.2727 rd |
| 100 reed | 54.5455 rd |
| 1000 reed | 545.4545 rd |
| 10000 reed | 5454.5455 rd |
| 100000 reed | 54545.4545 rd |
Reed
A reed is a historical unit of length used in various cultures for land measurement and construction. One reed is approximately equivalent to 2.5 to 3 meters or about 8.2 to 9.8 feet.
The exact length of a reed could vary depending on the region and historical period, as it was based on practical measurements of the length of a reed or a similar natural material used for measuring distances.
Reeds were used in historical land surveying, agriculture, and construction. Although not commonly used today, the unit provides historical context for traditional measurement practices and the use of natural materials in measurement systems.
Rod
A rod is a unit of length used in land measurement and surveying. One rod is equivalent to 16.5 feet or approximately 5.0292 meters.
The rod is defined as 16.5 feet, providing a measurement that is useful for various applications in land surveying, agriculture, and construction.
Rods are commonly used in tasks such as property measurement, plotting land, and agricultural practices. The unit provides a practical measurement for shorter distances and has historical significance in land surveying.
Frequently Asked Questions (FAQs)
1. What is the formula for converting Reed to Rod in Length?
The formula to convert Reed to Rod in Length is:
Reed / 1.8333333334171533
2. Is this tool free or paid?
This Length conversion tool, which converts Reed to Rod, is completely free to use.
3. How do I convert Length from Reed to Rod?
To convert Length from Reed to Rod, you can use the following formula:
Reed / 1.8333333334171533
For example, if you have a value in Reed, you substitute that value in place of Reed in the above formula, and solve the mathematical expression to get the equivalent value in Rod.
{
"conversion": "reeds-rods",
"x_slug": "reeds",
"y_slug": "rods",
"x": "reed",
"y": "rd",
"x_desc": "Reed",
"y_desc": "Rod",
"category": "Length",
"symbol": "m",
"formula": "x / 1.8333333334171533",
"precision": 16,
"examples": "<div class=\"example\">\n <div class=\"example_head\"><span class=\"example_n\">1</span>\n <h3 class=\"question\">Consider that a plot of land is measured to be 7 reeds in length.<br>Convert this length from reeds to Rod.</h3></div>\n <h4 class=\"answer\">Answer:</h4>\n <p><strong>Given:</strong></p>\n <p>The length in reed is:</p>\n <p class=\"step\"><span>Length<sub>(Reed)</sub></span> = 7</p>\n <p><strong>Formula:</strong></p>\n <p>The formula to convert length from reed to rod is:</p>\n <p class=\"formula step\"><span>Length<sub>(Rod)</sub></span> = <span>Length<sub>(Reed)</sub></span> / 1.8333333334171533</p>\n <p><strong>Substitution:</strong></p>\n <p>Substitute given weight <strong>Length<sub>(Reed)</sub> = 7</strong> in the above formula.</p>\n <p class=\"step\"><span>Length<sub>(Rod)</sub></span> = <span>7</span> / 1.8333333334171533</p>\n <p class=\"step\"><span>Length<sub>(Rod)</sub></span> = 3.8182</p>\n <p><strong>Final Answer:</strong></p>\n <p>Therefore, <strong>7 reed</strong> is equal to <strong>3.8182 rd</strong>.</p>\n <p>The length is <strong>3.8182 rd</strong>, in rod.</p>\n </div>\n <div class=\"example\">\n <div class=\"example_head\"><span class=\"example_n\">2</span>\n <h3 class=\"question\">Consider that a water channel is dug with a width of 3 reeds.<br>Convert this width from reeds to Rod.</h3></div>\n <h4 class=\"answer\">Answer:</h4>\n <p><strong>Given:</strong></p>\n <p>The length in reed is:</p>\n <p class=\"step\"><span>Length<sub>(Reed)</sub></span> = 3</p>\n <p><strong>Formula:</strong></p>\n <p>The formula to convert length from reed to rod is:</p>\n <p class=\"formula step\"><span>Length<sub>(Rod)</sub></span> = <span>Length<sub>(Reed)</sub></span> / 1.8333333334171533</p>\n <p><strong>Substitution:</strong></p>\n <p>Substitute given weight <strong>Length<sub>(Reed)</sub> = 3</strong> in the above formula.</p>\n <p class=\"step\"><span>Length<sub>(Rod)</sub></span> = <span>3</span> / 1.8333333334171533</p>\n <p class=\"step\"><span>Length<sub>(Rod)</sub></span> = 1.6364</p>\n <p><strong>Final Answer:</strong></p>\n <p>Therefore, <strong>3 reed</strong> is equal to <strong>1.6364 rd</strong>.</p>\n <p>The length is <strong>1.6364 rd</strong>, in rod.</p>\n </div>\n ",
"structured_data_1": "\n<script type=\"application/ld+json\">\n{\n \"@context\": \"https://schema.org\",\n \"@type\": \"WebApplication\",\n \"name\": \"Reed to Rod Unit Converter\",\n \"url\": \"https://convertonline.org/unit/?convert=kg-gram\",\n \"applicationCategory\": \"Utility\",\n \"operatingSystem\": \"All\",\n \"description\": \"Convert Reed (reed) to Rod (rd) using this online Length unit converter. Conversion formula, real life examples, conversion tables, etc.\",\n \"softwareVersion\": \"1.0\",\n \"offers\": {\n \"@type\": \"Offer\",\n \"price\": \"0.00\",\n \"priceCurrency\": \"USD\"\n },\n \"creator\": {\n \"@type\": \"Organization\",\n \"name\": \"ConvertOnline\",\n \"url\": \"https://convertonline.org\"\n },\n \"featureList\": [\n \"Convert Reed to Rod\",\n \"Instant conversion results\",\n \"Free to use\"\n ],\n \"keywords\": \"reed to rd, Reed to Rod converter, unit conversion, Length conversion\"\n}\n</script>\n ",
"img": "<img class=\"conversion\" src=\"/images/unit/length/reeds-rods.webp\" height=\"360\" width=\"640\" alt=\"Reed to Rod Converter | reed to rd\" />",
"table1n": "<h2><span class=\"x\">Reed</span> to <span class=\"y\">Rod</span> Conversion Table</h2><p>The following table gives some of the most used conversions from Reed to Rod.</p><table><thead><tr><th scope=\"column\" role=\"columnheader\">Reed (<span class=\"unit\">reed</span>)</th><th scope=\"column\" role=\"columnheader\">Rod (<span class=\"unit\">rd</span>)</th><tr></thead><tbody><tr><td>0 <span class=\"unit\">reed</span></td><td>0 <span class=\"unit\">rd</span></td></tr><tr><td>1 <span class=\"unit\">reed</span></td><td>0<span>.5455</span> <span class=\"unit\">rd</span></td></tr><tr><td>2 <span class=\"unit\">reed</span></td><td>1<span>.0909</span> <span class=\"unit\">rd</span></td></tr><tr><td>3 <span class=\"unit\">reed</span></td><td>1<span>.6364</span> <span class=\"unit\">rd</span></td></tr><tr><td>4 <span class=\"unit\">reed</span></td><td>2<span>.1818</span> <span class=\"unit\">rd</span></td></tr><tr><td>5 <span class=\"unit\">reed</span></td><td>2<span>.7273</span> <span class=\"unit\">rd</span></td></tr><tr><td>6 <span class=\"unit\">reed</span></td><td>3<span>.2727</span> <span class=\"unit\">rd</span></td></tr><tr><td>7 <span class=\"unit\">reed</span></td><td>3<span>.8182</span> <span class=\"unit\">rd</span></td></tr><tr><td>8 <span class=\"unit\">reed</span></td><td>4<span>.3636</span> <span class=\"unit\">rd</span></td></tr><tr><td>9 <span class=\"unit\">reed</span></td><td>4<span>.9091</span> <span class=\"unit\">rd</span></td></tr><tr><td>10 <span class=\"unit\">reed</span></td><td>5<span>.4545</span> <span class=\"unit\">rd</span></td></tr><tr><td>20 <span class=\"unit\">reed</span></td><td>10<span>.9091</span> <span class=\"unit\">rd</span></td></tr><tr><td>50 <span class=\"unit\">reed</span></td><td>27<span>.2727</span> <span class=\"unit\">rd</span></td></tr><tr><td>100 <span class=\"unit\">reed</span></td><td>54<span>.5455</span> <span class=\"unit\">rd</span></td></tr><tr><td>1000 <span class=\"unit\">reed</span></td><td>545<span>.4545</span> <span class=\"unit\">rd</span></td></tr><tr><td>10000 <span class=\"unit\">reed</span></td><td>5454<span>.5455</span> <span class=\"unit\">rd</span></td></tr><tr><td>100000 <span class=\"unit\">reed</span></td><td>54545<span>.4545</span> <span class=\"unit\">rd</span></td></tr></table>",
"units": [
[
"meters",
"Meters",
"m"
],
[
"kilometers",
"Kilometers",
"km"
],
[
"decimeters",
"Decimeters",
"dm"
],
[
"centimeters",
"Centimeters",
"cm"
],
[
"millimeters",
"Millimeters",
"mm"
],
[
"micrometers",
"Micrometers",
"Β΅m"
],
[
"nanometers",
"Nanometers",
"nm"
],
[
"miles",
"Miles",
"mi"
],
[
"yards",
"Yards",
"yd"
],
[
"feet",
"Feet",
"ft"
],
[
"inches",
"Inches",
"in"
],
[
"lightyears",
"Lightyears",
"ly"
],
[
"exameters",
"Exameters",
"Em"
],
[
"petameters",
"Petameters",
"Pm"
],
[
"terameters",
"Terameters",
"Tm"
],
[
"gigameters",
"Gigameters",
"Gm"
],
[
"megameters",
"Megameters",
"Mm"
],
[
"hectometers",
"Hectameters",
"hm"
],
[
"dekameters",
"Dekameters",
"dam"
],
[
"microns",
"Microns",
"Β΅"
],
[
"picometers",
"Picometers",
"pm"
],
[
"femtometers",
"Femtometers",
"fm"
],
[
"attometers",
"Attometers",
"am"
],
[
"megaparsecs",
"Megaparsecs",
"Mpc"
],
[
"kiloparsecs",
"Kiloparsecs",
"kpc"
],
[
"parsecs",
"Parsecs",
"pc"
],
[
"astronomical_unit",
"Astronomical Units",
"AU"
],
[
"leagues",
"Leagues",
"lea"
],
[
"nautical_leagues_uk",
"Nautical Leagues (UK)",
"nautical league"
],
[
"nautical_leagues",
"Nautical Leagues (International)",
"nautical league"
],
[
"leagues_statute",
"Leagues (statute)",
"st.league"
],
[
"nautical_miles_uk",
"Nautical Miles (UK)",
"NM (UK)"
],
[
"nautical_miles",
"Nautical miles (International)",
"nmi"
],
[
"miles_statute",
"Miles (statute)",
"mi (US)"
],
[
"miles_us_survey",
"Miles (US survey)",
"mi"
],
[
"miles_roman",
"Miles (Roman)",
"mi (roman)"
],
[
"kiloyards",
"Kiloyards",
"kyd"
],
[
"furlongs",
"Furlongs",
"fur"
],
[
"furlongs_us_survey",
"Furlongs (US survey)",
"fur"
],
[
"chains",
"Chains",
"ch"
],
[
"chain_us_survey",
"Chains (US survey)",
"ch"
],
[
"ropes",
"Ropes",
"rope"
],
[
"rods",
"Rod",
"rd"
],
[
"rods_us_survey",
"Rods (US survey)",
"rd"
],
[
"perch",
"Perch",
"perch"
],
[
"poles",
"Poles",
"pole"
],
[
"fathoms",
"Fathoms",
"fath"
],
[
"fathoms_us_survey",
"Fathoms (US survey)",
"fath"
],
[
"ell",
"ell",
"ell"
],
[
"foot_us_survey",
"Feet (US survey)",
"ft"
],
[
"links",
"Links",
"li"
],
[
"links_us_survey",
"link (US survey)",
"li"
],
[
"cubits_uk",
"Cubits (UK)",
"cubit"
],
[
"hands",
"Hands",
"hand"
],
[
"span_cloth",
"Span (cloth)",
"span"
],
[
"fingers_cloth",
"Fingers (cloth)",
"finger"
],
[
"nails",
"Nails (cloth)",
"nail"
],
[
"inches_us_survey",
"Inches (US survey)",
"in"
],
[
"barleycorns",
"Barleycorns",
"barleycorn"
],
[
"mil",
"mil",
"mil"
],
[
"microinches",
"Microinches",
"Β΅in"
],
[
"angstroms",
"Angstroms",
"A"
],
[
"fermi",
"Fermi",
"f"
],
[
"arpents",
"Arpent",
"arpent"
],
[
"picas",
"Pica",
"pica"
],
[
"points",
"Point",
"point"
],
[
"twips",
"Twip",
"twip"
],
[
"aln",
"aln",
"aln"
],
[
"famns",
"Famns",
"famn"
],
[
"calibers",
"Caliber",
"cl"
],
[
"centiinches",
"Centiinch",
"cin"
],
[
"kens",
"Kens",
"ken"
],
[
"russian_archin",
"Russian archin",
"russian archin"
],
[
"roman_actus",
"Roman actus",
"Roman actus"
],
[
"vara_de_tarea",
"Vara De Tarea",
"vara de tarea"
],
[
"vara_conuquera",
"Vara Conuquera",
"vara conuquera"
],
[
"vara_castellana",
"vara Castellana",
"vara castellana"
],
[
"cubits_greek",
"Cubit (Greek)",
"cubit (Greek)"
],
[
"long_reeds",
"Long Reed",
"long reed"
],
[
"reeds",
"Reed",
"reed"
],
[
"long_cubits",
"Long cubits",
"long cubit"
],
[
"handbreadths",
"Handbreadth",
"handbreadth"
],
[
"fingerbreadth",
"Fingerbreadth",
"fingerbreadth"
],
[
"planck_length",
"Planck length",
"Planck length"
],
[
"electron_radius_classical",
"Electron radius (classical) ",
"electron radius"
],
[
"bohr_radius",
"Bohr radius",
"b"
],
[
"earths_equatorial_radius",
"Earth's equatorial radius",
"earth's equatorial radius"
],
[
"earths_polar_radius",
"Earth's polar radius",
"Earth's polar radius"
],
[
"earths_distance_from_sun",
"Earth's distance from sun",
"earth's distance from sun"
],
[
"suns_radius",
"Sun's radius",
"sun's radius"
]
],
"y_long_desc": "A rod is a unit of length used in land measurement and surveying. One rod is equivalent to 16.5 feet or approximately 5.0292 meters. </p><p>The rod is defined as 16.5 feet, providing a measurement that is useful for various applications in land surveying, agriculture, and construction.</p><p>Rods are commonly used in tasks such as property measurement, plotting land, and agricultural practices. The unit provides a practical measurement for shorter distances and has historical significance in land surveying.",
"x_long_desc": "A reed is a historical unit of length used in various cultures for land measurement and construction. One reed is approximately equivalent to 2.5 to 3 meters or about 8.2 to 9.8 feet. </p><p>The exact length of a reed could vary depending on the region and historical period, as it was based on practical measurements of the length of a reed or a similar natural material used for measuring distances.</p><p>Reeds were used in historical land surveying, agriculture, and construction. Although not commonly used today, the unit provides historical context for traditional measurement practices and the use of natural materials in measurement systems."
}
ConvertOnline