Follow these steps to convert given length from the units of Twip to the units of Arpent.
Enter the input Twip value in the text field.
The calculator converts the given Twip into Arpent in realtime β using the conversion formula, and displays under the Arpent label. You do not need to click any button. If the input changes, Arpent value is re-calculated, just like that.
You may copy the resulting Arpent value using the Copy button.
To view a detailed step by step calculation of the conversion, click on the View Calculation button.
You can also reset the input by clicking on Reset button present below the input field.
What is the Formula to convert Twip to Arpent?
The formula to convert given length from Twip to Arpent is:
Length(Arpent) = Length(Twip) / 3317759.99739415
Substitute the given value of length in twip, i.e., Length(Twip) in the above formula and simplify the right-hand side value. The resulting value is the length in arpent, i.e., Length(Arpent).
Calculation
Calculation will be done after you enter a valid input.
Examples
1
Consider that a software application uses 1440 twips to define the height of a window. Convert this height from twips to Arpent.
Answer:
Given:
The length in twip is:
Length(Twip) = 1440
Formula:
The formula to convert length from twip to arpent is:
Length(Arpent) = Length(Twip) / 3317759.99739415
Substitution:
Substitute given weight Length(Twip) = 1440 in the above formula.
Length(Arpent) = 1440 / 3317759.99739415
Length(Arpent) = 0.0004340277781187
Final Answer:
Therefore, 1440 twip is equal to 0.0004340277781187 arpent.
The length is 0.0004340277781187 arpent, in arpent.
2
Consider that a custom user interface element is sized at 720 twips. Convert this size from twips to Arpent.
Answer:
Given:
The length in twip is:
Length(Twip) = 720
Formula:
The formula to convert length from twip to arpent is:
Length(Arpent) = Length(Twip) / 3317759.99739415
Substitution:
Substitute given weight Length(Twip) = 720 in the above formula.
Length(Arpent) = 720 / 3317759.99739415
Length(Arpent) = 0.0002170138890593
Final Answer:
Therefore, 720 twip is equal to 0.0002170138890593 arpent.
The length is 0.0002170138890593 arpent, in arpent.
Twip to Arpent Conversion Table
The following table gives some of the most used conversions from Twip to Arpent.
Twip (twip)
Arpent (arpent)
0 twip
0 arpent
1 twip
3.0141e-7arpent
2 twip
6.0282e-7arpent
3 twip
9.0422e-7arpent
4 twip
0.00000120563arpent
5 twip
0.00000150704arpent
6 twip
0.00000180845arpent
7 twip
0.00000210986arpent
8 twip
0.00000241127arpent
9 twip
0.00000271267arpent
10 twip
0.00000301408arpent
20 twip
0.00000602816arpent
50 twip
0.00001507041arpent
100 twip
0.00003014082arpent
1000 twip
0.00030140818arpent
10000 twip
0.00301408179arpent
100000 twip
0.03014081792arpent
Twip
A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.
The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.
Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.
Arpent
An arpent is a historical unit of length used primarily in French-speaking regions and in land measurement. One arpent is approximately equivalent to 192.75 feet or 58.66 meters.
The arpent was used in various regions, including France and the former French colonies, to measure land and property. Its length could vary slightly depending on the specific region and historical context.
Arpents were used in land surveying and agriculture, particularly in historical and regional contexts. Although less common today, the unit provides historical insight into land measurement practices and regional variations in measurement standards.
Frequently Asked Questions (FAQs)
1. What is the formula for converting Twip to Arpent in Length?
The formula to convert Twip to Arpent in Length is:
Twip / 3317759.99739415
2. Is this tool free or paid?
This Length conversion tool, which converts Twip to Arpent, is completely free to use.
3. How do I convert Length from Twip to Arpent?
To convert Length from Twip to Arpent, you can use the following formula:
Twip / 3317759.99739415
For example, if you have a value in Twip, you substitute that value in place of Twip in the above formula, and solve the mathematical expression to get the equivalent value in Arpent.