Twip to Kens Converter

Enter Twip


Kens





β‡… Switch toKens to Twip Converter

How to use this Twip to Kens Converter πŸ€”

Follow these steps to convert given length from the units of Twip to the units of Kens.

Twip to Kens Converter | twip to ken
  1. Enter the input Twip value in the text field.
  2. The calculator converts the given Twip into Kens in realtime ⌚ using the conversion formula, and displays under the Kens label. You do not need to click any button. If the input changes, Kens value is re-calculated, just like that.
  3. You may copy the resulting Kens value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Twip to Kens?

The formula to convert given length from Twip to Kens is:

Length(Kens) = Length(Twip) / 120096.00001219499

Substitute the given value of length in twip, i.e., Length(Twip) in the above formula and simplify the right-hand side value. The resulting value is the length in kens, i.e., Length(Kens).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a software application uses 1440 twips to define the height of a window.
Convert this height from twips to Kens.

Answer:

Given:

The length in twip is:

Length(Twip) = 1440

Formula:

The formula to convert length from twip to kens is:

Length(Kens) = Length(Twip) / 120096.00001219499

Substitution:

Substitute given weight Length(Twip) = 1440 in the above formula.

Length(Kens) = 1440 / 120096.00001219499

Length(Kens) = 0.0119904076726434

Final Answer:

Therefore, 1440 twip is equal to 0.0119904076726434 ken.

The length is 0.0119904076726434 ken, in kens.

2

Consider that a custom user interface element is sized at 720 twips.
Convert this size from twips to Kens.

Answer:

Given:

The length in twip is:

Length(Twip) = 720

Formula:

The formula to convert length from twip to kens is:

Length(Kens) = Length(Twip) / 120096.00001219499

Substitution:

Substitute given weight Length(Twip) = 720 in the above formula.

Length(Kens) = 720 / 120096.00001219499

Length(Kens) = 0.0059952038363217

Final Answer:

Therefore, 720 twip is equal to 0.0059952038363217 ken.

The length is 0.0059952038363217 ken, in kens.

Twip to Kens Conversion Table

The following table gives some of the most used conversions from Twip to Kens.

Twip (twip)Kens (ken)
0 twip0 ken
1 twip0.00000832667 ken
2 twip0.00001665334 ken
3 twip0.00002498002 ken
4 twip0.00003330669 ken
5 twip0.00004163336 ken
6 twip0.00004996003 ken
7 twip0.0000582867 ken
8 twip0.00006661338 ken
9 twip0.00007494005 ken
10 twip0.00008326672 ken
20 twip0.00016653344 ken
50 twip0.0004163336 ken
100 twip0.0008326672 ken
1000 twip0.00832667199 ken
10000 twip0.08326671995 ken
100000 twip0.8327 ken

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Kens

A ken is a historical unit of length used in various cultures, particularly in Asia. The length of a ken can vary depending on the region and context. In Japan, one ken is approximately equivalent to 6 feet or about 1.8288 meters.

The ken was traditionally used in architectural and construction measurements, particularly in the design of buildings and layout of spaces.

Ken measurements were utilized in historical architecture and construction practices in Asian cultures. Although not commonly used today, the unit provides historical context for traditional measurement standards and practices in building and design.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Twip to Kens in Length?

2. Is this tool free or paid?

3. How do I convert Length from Twip to Kens?