Twip to Reed Converter

Enter Twip


Reed





β‡… Switch toReed to Twip Converter

How to use this Twip to Reed Converter πŸ€”

Follow these steps to convert given length from the units of Twip to the units of Reed.

Twip to Reed Converter | twip to reed
  1. Enter the input Twip value in the text field.
  2. The calculator converts the given Twip into Reed in realtime ⌚ using the conversion formula, and displays under the Reed label. You do not need to click any button. If the input changes, Reed value is re-calculated, just like that.
  3. You may copy the resulting Reed value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Twip to Reed?

The formula to convert given length from Twip to Reed is:

Length(Reed) = Length(Twip) / 155520.00000583753

Substitute the given value of length in twip, i.e., Length(Twip) in the above formula and simplify the right-hand side value. The resulting value is the length in reed, i.e., Length(Reed).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a software application uses 1440 twips to define the height of a window.
Convert this height from twips to Reed.

Answer:

Given:

The length in twip is:

Length(Twip) = 1440

Formula:

The formula to convert length from twip to reed is:

Length(Reed) = Length(Twip) / 155520.00000583753

Substitution:

Substitute given weight Length(Twip) = 1440 in the above formula.

Length(Reed) = 1440 / 155520.00000583753

Length(Reed) = 0.0092592592589117

Final Answer:

Therefore, 1440 twip is equal to 0.0092592592589117 reed.

The length is 0.0092592592589117 reed, in reed.

2

Consider that a custom user interface element is sized at 720 twips.
Convert this size from twips to Reed.

Answer:

Given:

The length in twip is:

Length(Twip) = 720

Formula:

The formula to convert length from twip to reed is:

Length(Reed) = Length(Twip) / 155520.00000583753

Substitution:

Substitute given weight Length(Twip) = 720 in the above formula.

Length(Reed) = 720 / 155520.00000583753

Length(Reed) = 0.0046296296294559

Final Answer:

Therefore, 720 twip is equal to 0.0046296296294559 reed.

The length is 0.0046296296294559 reed, in reed.

Twip to Reed Conversion Table

The following table gives some of the most used conversions from Twip to Reed.

Twip (twip)Reed (reed)
0 twip0 reed
1 twip0.00000643004 reed
2 twip0.00001286008 reed
3 twip0.00001929012 reed
4 twip0.00002572016 reed
5 twip0.00003215021 reed
6 twip0.00003858025 reed
7 twip0.00004501029 reed
8 twip0.00005144033 reed
9 twip0.00005787037 reed
10 twip0.00006430041 reed
20 twip0.00012860082 reed
50 twip0.00032150206 reed
100 twip0.00064300412 reed
1000 twip0.00643004115 reed
10000 twip0.06430041152 reed
100000 twip0.643 reed

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Reed

A reed is a historical unit of length used in various cultures for land measurement and construction. One reed is approximately equivalent to 2.5 to 3 meters or about 8.2 to 9.8 feet.

The exact length of a reed could vary depending on the region and historical period, as it was based on practical measurements of the length of a reed or a similar natural material used for measuring distances.

Reeds were used in historical land surveying, agriculture, and construction. Although not commonly used today, the unit provides historical context for traditional measurement practices and the use of natural materials in measurement systems.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Twip to Reed in Length?

2. Is this tool free or paid?

3. How do I convert Length from Twip to Reed?