Twip to Rod Converter

Enter Twip


Rod





β‡… Switch toRod to Twip Converter

How to use this Twip to Rod Converter πŸ€”

Follow these steps to convert given length from the units of Twip to the units of Rod.

Twip to Rod Converter | twip to rd
  1. Enter the input Twip value in the text field.
  2. The calculator converts the given Twip into Rod in realtime ⌚ using the conversion formula, and displays under the Rod label. You do not need to click any button. If the input changes, Rod value is re-calculated, just like that.
  3. You may copy the resulting Rod value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Twip to Rod?

The formula to convert given length from Twip to Rod is:

Length(Rod) = Length(Twip) / 285120.00002373784

Substitute the given value of length in twip, i.e., Length(Twip) in the above formula and simplify the right-hand side value. The resulting value is the length in rod, i.e., Length(Rod).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a software application uses 1440 twips to define the height of a window.
Convert this height from twips to Rod.

Answer:

Given:

The length in twip is:

Length(Twip) = 1440

Formula:

The formula to convert length from twip to rod is:

Length(Rod) = Length(Twip) / 285120.00002373784

Substitution:

Substitute given weight Length(Twip) = 1440 in the above formula.

Length(Rod) = 1440 / 285120.00002373784

Length(Rod) = 0.0050505050500846

Final Answer:

Therefore, 1440 twip is equal to 0.0050505050500846 rd.

The length is 0.0050505050500846 rd, in rod.

2

Consider that a custom user interface element is sized at 720 twips.
Convert this size from twips to Rod.

Answer:

Given:

The length in twip is:

Length(Twip) = 720

Formula:

The formula to convert length from twip to rod is:

Length(Rod) = Length(Twip) / 285120.00002373784

Substitution:

Substitute given weight Length(Twip) = 720 in the above formula.

Length(Rod) = 720 / 285120.00002373784

Length(Rod) = 0.0025252525250423

Final Answer:

Therefore, 720 twip is equal to 0.0025252525250423 rd.

The length is 0.0025252525250423 rd, in rod.

Twip to Rod Conversion Table

The following table gives some of the most used conversions from Twip to Rod.

Twip (twip)Rod (rd)
0 twip0 rd
1 twip0.0000035073 rd
2 twip0.00000701459 rd
3 twip0.00001052189 rd
4 twip0.00001402918 rd
5 twip0.00001753648 rd
6 twip0.00002104377 rd
7 twip0.00002455107 rd
8 twip0.00002805836 rd
9 twip0.00003156566 rd
10 twip0.00003507295 rd
20 twip0.0000701459 rd
50 twip0.00017536476 rd
100 twip0.00035072952 rd
1000 twip0.00350729517 rd
10000 twip0.03507295174 rd
100000 twip0.3507 rd

Twip

A twip is a unit of length used in digital typography and graphic design. One twip is equivalent to 1/20 of a point or approximately 1/1440 of an inch, which is about 0.0018 inches or 0.045 mm.

The twip is defined as a very small unit of measurement, providing fine granularity for specifying small increments in digital design and layout.

Twips are used in digital typography, graphic design, and computer programming to achieve precise control over the placement and spacing of text and graphical elements. The unit allows for detailed adjustments and fine-tuning in digital documents and layouts.

Rod

A rod is a unit of length used in land measurement and surveying. One rod is equivalent to 16.5 feet or approximately 5.0292 meters.

The rod is defined as 16.5 feet, providing a measurement that is useful for various applications in land surveying, agriculture, and construction.

Rods are commonly used in tasks such as property measurement, plotting land, and agricultural practices. The unit provides a practical measurement for shorter distances and has historical significance in land surveying.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Twip to Rod in Length?

2. Is this tool free or paid?

3. How do I convert Length from Twip to Rod?