vara Castellana to Feet (US survey) Converter

Enter vara Castellana


Feet (US survey)





β‡… Switch toFeet (US survey) to vara Castellana Converter

How to use this vara Castellana to Feet (US survey) Converter πŸ€”

Follow these steps to convert given length from the units of vara Castellana to the units of Feet (US survey).

  1. Enter the input vara Castellana value in the text field.
  2. The calculator converts the given vara Castellana into Feet (US survey) in realtime ⌚ using the conversion formula, and displays under the Feet (US survey) label. You do not need to click any button. If the input changes, Feet (US survey) value is re-calculated, just like that.
  3. You may copy the resulting Feet (US survey) value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert vara Castellana to Feet (US survey)?

The formula to convert given length from vara Castellana to Feet (US survey) is:

Length(Feet (US survey)) = Length(vara Castellana) / 0.3649642335825752

Substitute the given value of length in vara castellana, i.e., Length(vara Castellana) in the above formula and simplify the right-hand side value. The resulting value is the length in feet (us survey), i.e., Length(Feet (US survey)).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a piece of land is recorded as 18 vara castellana in length.
Convert this length from vara castellana to Feet (US survey).

Answer:

Given:

The length in vara castellana is:

Length(vara Castellana) = 18

Formula:

The formula to convert length from vara castellana to feet (us survey) is:

Length(Feet (US survey)) = Length(vara Castellana) / 0.3649642335825752

Substitution:

Substitute given weight Length(vara Castellana) = 18 in the above formula.

Length(Feet (US survey)) = 18 / 0.3649642335825752

Length(Feet (US survey)) = 49.3199

Final Answer:

Therefore, 18 vara castellana is equal to 49.3199 ft.

The length is 49.3199 ft, in feet (us survey).

2

Consider that a building's width is measured to be 10 vara castellana.
Convert this width from vara castellana to Feet (US survey).

Answer:

Given:

The length in vara castellana is:

Length(vara Castellana) = 10

Formula:

The formula to convert length from vara castellana to feet (us survey) is:

Length(Feet (US survey)) = Length(vara Castellana) / 0.3649642335825752

Substitution:

Substitute given weight Length(vara Castellana) = 10 in the above formula.

Length(Feet (US survey)) = 10 / 0.3649642335825752

Length(Feet (US survey)) = 27.3999

Final Answer:

Therefore, 10 vara castellana is equal to 27.3999 ft.

The length is 27.3999 ft, in feet (us survey).

vara Castellana to Feet (US survey) Conversion Table

The following table gives some of the most used conversions from vara Castellana to Feet (US survey).

vara Castellana (vara castellana)Feet (US survey) (ft)
0 vara castellana0 ft
1 vara castellana2.74 ft
2 vara castellana5.48 ft
3 vara castellana8.22 ft
4 vara castellana10.96 ft
5 vara castellana13.7 ft
6 vara castellana16.44 ft
7 vara castellana19.18 ft
8 vara castellana21.92 ft
9 vara castellana24.66 ft
10 vara castellana27.3999 ft
20 vara castellana54.7999 ft
50 vara castellana136.9997 ft
100 vara castellana273.9995 ft
1000 vara castellana2739.9945 ft
10000 vara castellana27399.9452 ft
100000 vara castellana273999.452 ft

vara Castellana

A vara castellana is a historical unit of length used in Spain and its former colonies. One vara castellana is approximately equivalent to 0.835 meters or about 2.74 feet.

The vara castellana was used for various purposes, including land measurement, construction, and textiles. Its length was based on historical Spanish measurement standards and could vary slightly depending on the specific region and period.

The vara castellana is less commonly used today but provides historical context for measurement practices in Spain and its former colonies. It reflects the traditional standards of length used in land division, construction, and trade.

Feet (US survey)

A foot (US survey) is a unit of length used in land surveying and mapping in the United States. One foot (US survey) is defined as exactly 1200/3937 meters, which is approximately 0.3048006096 meters or about 0.3048 meters.

The US survey foot is slightly different from the international foot, which is defined as exactly 0.3048 meters. The difference is due to historical measurement standards and is used in specific contexts such as land surveying and engineering in the United States.

US survey feet are used primarily in the United States for property measurement, land surveying, and mapping, ensuring consistency in measurements within these fields.

Frequently Asked Questions (FAQs)

1. What is the formula for converting vara Castellana to Feet (US survey) in Length?

2. Is this tool free or paid?

3. How do I convert Length from vara Castellana to Feet (US survey)?