Hour Angles to Diameter Parts Converter

Enter Hour Angles


Diameter Parts





⇅ Switch toDiameter Parts to Hour Angles Converter

How to use this Hour Angles to Diameter Parts Converter 🤔

Follow these steps to convert given angle from the units of Hour Angles to the units of Diameter Parts.

  1. Enter the input Hour Angles value in the text field.
  2. The calculator converts the given Hour Angles into Diameter Parts in realtime ⌚ using the conversion formula, and displays under the Diameter Parts label. You do not need to click any button. If the input changes, Diameter Parts value is re-calculated, just like that.
  3. You may copy the resulting Diameter Parts value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Hour Angles to Diameter Parts?

The formula to convert given angle from Hour Angles to Diameter Parts is:

Angle(Diameter Parts) = Angle(Hour Angles) × 376.991 / 24

Substitute the given value of angle in hour angles, i.e., Angle(Hour Angles) in the above formula and simplify the right-hand side value. The resulting value is the angle in diameter parts, i.e., Angle(Diameter Parts).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that the position of a celestial body is tracked at 6 hour angles.
Convert this angle from hour angles to Diameter Parts.

Answer:

Given:

The angle in hour angles is:

Angle(Hour Angles) = 6

Formula:

The formula to convert angle from hour angles to diameter parts is:

Angle(Diameter Parts) = Angle(Hour Angles) × 376.991 / 24

Substitution:

Substitute given weight Angle(Hour Angles) = 6 in the above formula.

Angle(Diameter Parts) = 6 × 376.991 / 24

Angle(Diameter Parts) = 94.2477

Final Answer:

Therefore, 6 hour angle is equal to 94.2477 diameter part.

The angle is 94.2477 diameter part, in diameter parts.

2

Consider that a sundial shows a time difference of 4 hour angles.
Convert this angle from hour angles to Diameter Parts.

Answer:

Given:

The angle in hour angles is:

Angle(Hour Angles) = 4

Formula:

The formula to convert angle from hour angles to diameter parts is:

Angle(Diameter Parts) = Angle(Hour Angles) × 376.991 / 24

Substitution:

Substitute given weight Angle(Hour Angles) = 4 in the above formula.

Angle(Diameter Parts) = 4 × 376.991 / 24

Angle(Diameter Parts) = 62.8318

Final Answer:

Therefore, 4 hour angle is equal to 62.8318 diameter part.

The angle is 62.8318 diameter part, in diameter parts.

Hour Angles to Diameter Parts Conversion Table

The following table gives some of the most used conversions from Hour Angles to Diameter Parts.

Hour Angles (hour angle)Diameter Parts (diameter part)
0 hour angle0 diameter part
1 hour angle15.708 diameter part
10 hour angle157.0796 diameter part
45 hour angle706.8581 diameter part
90 hour angle1413.7163 diameter part
180 hour angle2827.4325 diameter part
360 hour angle5654.865 diameter part
1000 hour angle15707.9583 diameter part

Hour Angles

Hour angles are a unit of angular measurement used in astronomy to describe the position of celestial objects relative to an observer's local meridian. One hour angle corresponds to 15 degrees, reflecting the Earth's rotation rate of 15 degrees per hour. Hour angles are crucial in celestial navigation and the tracking of astronomical objects.

Diameter Parts

Diameter parts are a less common unit of angular measurement, historically used to describe angles in terms of the fractional parts of a circle's diameter. This unit was more prevalent in classical geometry and certain types of mechanical design, where direct relationships between linear measurements and angles were essential.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Hour Angles to Diameter Parts in Angle?

2. Is this tool free or paid?

3. How do I convert Angle from Hour Angles to Diameter Parts?