Milli-radians to Diameter Parts Converter

Enter Milli-radians


Diameter Parts





⇅ Switch toDiameter Parts to Milli-radians Converter

How to use this Milli-radians to Diameter Parts Converter 🤔

Follow these steps to convert given angle from the units of Milli-radians to the units of Diameter Parts.

  1. Enter the input Milli-radians value in the text field.
  2. The calculator converts the given Milli-radians into Diameter Parts in realtime ⌚ using the conversion formula, and displays under the Diameter Parts label. You do not need to click any button. If the input changes, Diameter Parts value is re-calculated, just like that.
  3. You may copy the resulting Diameter Parts value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Milli-radians to Diameter Parts?

The formula to convert given angle from Milli-radians to Diameter Parts is:

Angle(Diameter Parts) = Angle(Milli-radians) × 376.991 / (2000 × π)

Substitute the given value of angle in milli-radians, i.e., Angle(Milli-radians) in the above formula and simplify the right-hand side value. The resulting value is the angle in diameter parts, i.e., Angle(Diameter Parts).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a sniper adjusts their scope by 2 milliradians for long-distance accuracy.
Convert this angle from milliradians to Diameter Parts.

Answer:

Given:

The angle in milli-radians is:

Angle(Milli-radians) = 2

Formula:

The formula to convert angle from milli-radians to diameter parts is:

Angle(Diameter Parts) = Angle(Milli-radians) × 376.991 / (2000 × π)

Substitution:

Substitute given weight Angle(Milli-radians) = 2 in the above formula.

Angle(Diameter Parts) = 2 × 376.991 / (2000 × 3.14159265359)

Angle(Diameter Parts) = 0.12

Final Answer:

Therefore, 2 mrad is equal to 0.12 diameter part.

The angle is 0.12 diameter part, in diameter parts.

2

Consider that a military rangefinder uses 5 milliradians for precise targeting.
Convert this angle from milliradians to Diameter Parts.

Answer:

Given:

The angle in milli-radians is:

Angle(Milli-radians) = 5

Formula:

The formula to convert angle from milli-radians to diameter parts is:

Angle(Diameter Parts) = Angle(Milli-radians) × 376.991 / (2000 × π)

Substitution:

Substitute given weight Angle(Milli-radians) = 5 in the above formula.

Angle(Diameter Parts) = 5 × 376.991 / (2000 × 3.14159265359)

Angle(Diameter Parts) = 0.3

Final Answer:

Therefore, 5 mrad is equal to 0.3 diameter part.

The angle is 0.3 diameter part, in diameter parts.

Milli-radians to Diameter Parts Conversion Table

The following table gives some of the most used conversions from Milli-radians to Diameter Parts.

Milli-radians (mrad)Diameter Parts (diameter part)
0 mrad0 diameter part
1 mrad0.05999998115 diameter part
10 mrad0.6 diameter part
45 mrad2.7 diameter part
90 mrad5.4 diameter part
180 mrad10.8 diameter part
360 mrad21.6 diameter part
1000 mrad60 diameter part

Milli-radians

Milli-radians (mrad) are a unit of angular measurement equal to one-thousandth of a radian. This small unit is used in fields such as ballistics, gunnery, and optics, where precise angular measurements are critical. Milli-radians allow for the calculation of minute angular displacements, distances, and target adjustments.

Diameter Parts

Diameter parts are a less common unit of angular measurement, historically used to describe angles in terms of the fractional parts of a circle's diameter. This unit was more prevalent in classical geometry and certain types of mechanical design, where direct relationships between linear measurements and angles were essential.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Milli-radians to Diameter Parts in Angle?

2. Is this tool free or paid?

3. How do I convert Angle from Milli-radians to Diameter Parts?