Seconds to Diameter Parts Converter

Enter Seconds


Diameter Parts





⇅ Switch toDiameter Parts to Seconds Converter

How to use this Seconds to Diameter Parts Converter 🤔

Follow these steps to convert given angle from the units of Seconds to the units of Diameter Parts.

  1. Enter the input Seconds value in the text field.
  2. The calculator converts the given Seconds into Diameter Parts in realtime ⌚ using the conversion formula, and displays under the Diameter Parts label. You do not need to click any button. If the input changes, Diameter Parts value is re-calculated, just like that.
  3. You may copy the resulting Diameter Parts value using the Copy button.
  4. To view a detailed step by step calculation of the conversion, click on the View Calculation button.
  5. You can also reset the input by clicking on Reset button present below the input field.

What is the Formula to convert Seconds to Diameter Parts?

The formula to convert given angle from Seconds to Diameter Parts is:

Angle(Diameter Parts) = Angle(Seconds) × 376.991 / 1296000

Substitute the given value of angle in seconds, i.e., Angle(Seconds) in the above formula and simplify the right-hand side value. The resulting value is the angle in diameter parts, i.e., Angle(Diameter Parts).

Calculation

Calculation will be done after you enter a valid input.

Examples

1

Consider that a microscope's fine adjustment is set to 30 arc seconds for detailed observation.
Convert this angle from seconds to Diameter Parts.

Answer:

Given:

The angle in seconds is:

Angle(Seconds) = 30

Formula:

The formula to convert angle from seconds to diameter parts is:

Angle(Diameter Parts) = Angle(Seconds) × 376.991 / 1296000

Substitution:

Substitute given weight Angle(Seconds) = 30 in the above formula.

Angle(Diameter Parts) = 30 × 376.991 / 1296000

Angle(Diameter Parts) = 0.00872664352

Final Answer:

Therefore, 30 " is equal to 0.00872664352 diameter part.

The angle is 0.00872664352 diameter part, in diameter parts.

2

Consider that a telescope's alignment needs to be within 20 arc seconds for accurate tracking.
Convert this angle from seconds to Diameter Parts.

Answer:

Given:

The angle in seconds is:

Angle(Seconds) = 20

Formula:

The formula to convert angle from seconds to diameter parts is:

Angle(Diameter Parts) = Angle(Seconds) × 376.991 / 1296000

Substitution:

Substitute given weight Angle(Seconds) = 20 in the above formula.

Angle(Diameter Parts) = 20 × 376.991 / 1296000

Angle(Diameter Parts) = 0.00581776235

Final Answer:

Therefore, 20 " is equal to 0.00581776235 diameter part.

The angle is 0.00581776235 diameter part, in diameter parts.

Seconds to Diameter Parts Conversion Table

The following table gives some of the most used conversions from Seconds to Diameter Parts.

Seconds (")Diameter Parts (diameter part)
0 "0 diameter part
1 "0.00029088812 diameter part
10 "0.00290888117 diameter part
45 "0.01308996528 diameter part
90 "0.02617993056 diameter part
180 "0.05235986111 diameter part
360 "0.1047 diameter part
1000 "0.2909 diameter part

Seconds

Seconds of arc, often simply called arcseconds, are a further subdivision of minutes of arc, with 60 seconds in one minute. This small unit is used for extremely precise angular measurements, such as those needed in astronomy, optics, and surveying, where even minute differences in angle can be significant.

Diameter Parts

Diameter parts are a less common unit of angular measurement, historically used to describe angles in terms of the fractional parts of a circle's diameter. This unit was more prevalent in classical geometry and certain types of mechanical design, where direct relationships between linear measurements and angles were essential.

Frequently Asked Questions (FAQs)

1. What is the formula for converting Seconds to Diameter Parts in Angle?

2. Is this tool free or paid?

3. How do I convert Angle from Seconds to Diameter Parts?